Power Menu Items - HP Vectra XM5 4 User Manual

Setup Item
The start-up priority follows the order of the devices listed below.
Start from Network
Start from Flexible Disk
Start from CD-ROM
Start from Hard Disk

POWER MENU ITEMS

When you select this menu group, a screen similar to the one below will appear.
PhoenixBIOS Setup — Copyright 1985-95 Phoenix Technologies Ltd.
Main Configuration
Standby delay
Standby Wakeup
Mouse PS/2 IRQ 12
Suspend Wakeup
IRQ3 (Serial port)
IRQ4 (Serial port)
Integrated Network
Power-On
Network
Space-bar
F1 Help
ESC Exit
Start-up Center Submenu (Security group)
Default* Action
[Disabled] Enable this feature to allow the computer to start from
the network. Besides the default, you have two ways to
enable a start from the network:
[NOVELL/ETHERNET/RIPL]
[MICROSOFT/ETHERNET/RIPL]
[Enabled] Disable this feature to prevent unauthorized use of the
flexible disk drive to start the computer. (The drive will
still be available for reading and writing data.)
[Disabled] Disable this feature to prevent unauthorized use of the
CD-ROM to start the computer. (The drive will still be
available for reading and writing data.)
[Enabled] Disable this feature to prevent unauthorized use of the
hard disk drive to start the computer. (The drive will
still be available for reading and writing data.)
Copyright 1995 Hewlett-Packard Rev. GW.O5.xx
Security
[30 min]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Select Item F7/F8 Change Value
Select Menu Enter Select > Sub-Menu
Power Exit
Item-Specific Help
Set the period of
system inactivity
before the system
runs in Standby
mode (slows down
the processor). The
delay is an
approximate time
depending on the
CPU speed.
F9 Setup Defaults
F10 Previous Values