Setting Up And Using Your Pc - HP Vectra VL800 User Manual

WARNING
Installation Tools
1

Setting Up and Using Your PC

If you are in any doubt that you can lift the PC and monitor safely, do not
try to move them without help.
1 When you receive your PC, unpack all of the components.
2 Place the PC on a sturdy desk with easily accessible power outlets and
enough space for the keyboard, mouse, and any other accessories.
3 Position the PC so that its rear connectors are easily accessible.
No tools are required to set up your PC. However, if you plan to install a
disk drive or an accessory board inside your PC, you will need a flat-blade
screwdriver. For more information on installing accessories, refer to
"Installing and Replacing Hardware Parts in Your PC", on page 23.