HP Vectra VL600 Installation Manual page 5

Chapter 1
HP Locks for Master Pass Key System
This manual describes how to install an HP lock in your PC. This
lock can either be opened with the key provided or, if configured
before installation in the PC, with the Master Pass Key, which is
available from HP as a separate accessory.
Supported Platforms
To find out on which PCs you can install this accessory, go to the
following HP accessories web site:
www.hp.com/go/pcaccessories
WARNING
For your safety, never remove the PC's cover without first
removing the power cord and any connection to a
telecommunication network. Always replace the cover before
switching the PC on again.
Box Contents
lock x 50
adapter x 1 (see
the (see Master
Pass Key System
User's Guide)
key x 50
clip x 50
English 1