Function Introduction For Combination Buttons - Lennox LM036CO-100P232-1X Owner's Manual

Function introduction for combination buttons

Combination of "
Press "▲" and "
controller is locked,
three times.
Combination of "MODE" and " " buttons:
About switch between Fahrenheit and centigrade
At unit OFF, press "MODE" and "
Combination of "TEMP" and "CLOCK" buttons:
About Energy-saving Function
Press "TEMP" and "CLOCK" simultaneously in COOL mode to start energy-saving function.
Nixie tube on the remote controller displays "SE". Repeat the operation to quit the function.
Combination of "TEMP" and "CLOCK" buttons:
About 8℃ Heating Function
Press "TEMP" and "CLOCK" simultaneously in HEAT mode to start 8℃ Heating Function
Nixie tube on the remote controller displays "
(46℉ if Fahrenheit is adopted). Repeat the operation to quit the function.
About Back-lighting Function
The unit lights for 4s when energizing for the first time, and 3s for later press.
" and " " buttons: About lock
▲
" buttons simultaneously to lock or unlock the keypad. If the remote
is displayed. In this case, pressing any button,
" buttons simultaneously to switch between ℃ and ℉.
" and a selected temperature of "8℃".
12
blinks