HP Vectra VE6 8 Supplementary Manual page 8

Component
Sound Card SoundBlaster Pro-compatible (Aztech)
(selected
models)
LAN board 3Com 905B-TX (bundled models) or Intel 10/100Base-T (CAP models) LAN board
(selected with WOL (Wake On LAN) capability, including Remote Power On/Remote Wake Up
models)
Graphics 64-bit ATI Rage IIc AGP card,
2 MB EDO (not upgradeable) on AGP
bus
Operating Windows NT (Service Pack 3) or Windows 95 (SR 2.5)
Systems
Connectors 2 Serial, 1 Parallel, Keyboard, Mouse, 2 stacked USB, 15-pin VGA
Expandability Shelves: 5, including Floppy Disk Drive (3
(desktop) front-accessible)
Accessory Slots: 3 PCI, 2 ISA
Expandability Shelves: 6 including Floppy Disk Drive
(minitower) (4 front-accessible)
Accessory Slots: 3 PCI, 2 ISA
BIOS AMI standard BIOS
Power Supply Manually switched 115/230 VAC, 145 W continuous output
Power Savings Normal, standby, suspend (sleep)
Input/Output Primary IDE cable: Ultra ATA
Cables Secondary IDE (CD-ROM) cable: Standard IDE (only on models supplied with a
CD-ROM drive)
Floppy Disk Drive cable
Note: both IDE channels are Ultra ATA
Compliancy DMI 2.0 / SMBIOS 1.x
PC97 Phase 1
EPA Energy Star
Vectra Product Hardware Comparison
HP Vectra VE 7/xxx PC
4
HP Vectra VE 8/xxx PC
Matrox Productiva M100 AGP
card, 4 MB EDO (not upgradeable) on
AGP bus
Shelves: 5, including Floppy Disk Drive (3
front-accessible)
Accessory Slots: 4 PCI, 1 ISA,
1 ISA/PCI combination
Shelves: 6 including Floppy Disk Drive
(4 front-accessible)
Accessory Slots: 4 PCI, 1 ISA,
1 ISA/PCI combination