Honda TRX500FE1 Owner's Manual page 189

Draining Water from Brakes
Refer to Safety Precautions on page 111.
RIGHT REAR
(2)
(1)
(1) rear brake drain bolt
1. Make sure the engine is OFF and the parking brake is set.
2. Remove the rear brake drain bolt (1) and sealing washer (2) from
the bottom of the rear brake panel.
If any water drains, the brake seals must be replaced by your
dealer as soon as possible.
3. Install the rear brake drain bolt with a new sealing washer and
tighten it to the specified torque:
12 N·m (1.2 kgf·m, 9 lbf·ft)
(2) sealing washer
Servicing Your Honda
Brakes
179