Table of Contents
Advertisement
3.2
AMI BIOS Setup
AMI BIOS ROM has a built-in Setup program that allows users to modify the basic
system configuration. This information is stored in a battery-backed CMOS RAM and
BIOS NVRAM so that it retains the Setup information when the power is turned off.
To enter setup, power on the computer and press <Del>or <ESC> immediately. The
following are short descriptions of each submenu:
Main – Date and time can be set here. Press <Tab> to switch between date elements
Advanced – Enable/ Disable boot options for legacy network devices
Chipset – Host bridge parameters
Security – The setup administrator password can be set here
Boot – Enable/ Disable Quiet Boot option
Save & Exit –Save your changes and exit system setup
Chapter 3 – BIOS Setup
26
Advertisement
Table of Contents
