Setup Utility; Rbsu Erase Option - HP ProLiant xw25p User Manual

To access the System Maintenance menu, press the F10 key when prompted from the boot option
Options" on page 46) screen.
From the System Maintenance menu, you can select from the following utilities that are embedded in the
system ROM:
Setup Utility runs the RBSU
Inspect Utility runs the embedded Inspect Utility
Diagnostics Utility runs the embedded Diagnostics Utility (on page 42)

Setup Utility

Select Setup Utility from the System Maintenance menu to run the Setup Utility. Running Setup Utility
exits the System Maintenance menu and runs RBSU.

RBSU Erase Option

The RBSU Erase option allows you to erase the system configuration and boot drive. On versions of RBSU
without this new feature, the Erase Non-Volatile Memory option is available in the Advanced Options
menu of RBSU, allowing you to erase the system configuration by resetting the NVRAM to an initial,
factory state.
The new option, Erase NVRAM/Boot Disk, also erases the system configuration by resetting the NVRAM,
but erases the boot disk as well. The RBSU Erase option should only be used when you are redeploying a
server and are required to erase the NVRAM and boot drive to reinstall the operating system. If available
for the server, the Erase NVRAM/Boot Disk option is listed under the Advanced Options menu in RBSU.
("Boot
ROM-based enhancements 40