Network Information Service; Miscellaneous Parameters - HP PL Class 450/500/550/600/650/700/750 Supplementary Manual

Setup and recovery guide

Hide thumbs Also See for PL Class 450/500/550/600/650/700/750:

Table of Contents

System Setup

Conﬁguring Your Linux Personal Workstation

To change or remove an address, click on it to select it, and click on the

Modify or Remove button above it.

Network Information Service

When you have entered all DNS information, click the Authentication

tab at the top of the window. This changes the window to the following

form:

If your workstation will use Network Information Service (NIS), click the

square next to "Enable NIS". You will need to enter the NIS Domain

Name where indicated. Below that, "Request via Broadcast" is selected.

If you unselect it, you need to type the Server IP Address in the box

below it. Ask your system administrator whether you should unselect

"Use Shadow Passwords" or "Enable MD5 Passwords".

When you have ﬁnished with this window, click OK. The window closes.

The bottom section of the Linux Setup Tool window is called

"Miscellaneous Parameters:". You can set these parameters in any order.

Chapter 1

Table of Contents