Tape Operation; Playing A Tape - Aiwa CS-P500 Operating Instructions Manual

B

TAPE OPERATION

Use Type I (normal) tapes only.

PLAYING A TAPE

1
Place your finger on the top of the cassette holder (k OPEN) and pull it, then
insert a tape with the exposed side up and the side to be played facing out.
2
Set FUNCTION to TAPE.
3
Press x PLAY to start play.
4
Turn VOLUME to adjust the sound.
s STOP - Stops play.
f F FWD/g REW
- Fast forwards/rewinds. To stop the winding, press s STOP.
When the end of a tape is reached, press s to release f, g.
- Cues/reviews the tape during play. Keep f or g pressed and then release it.
RECORDING
Note that recording is done on only one side of the tape.
1
Insert a tape with the side to be recorded facing out.
2
Tune to a station.
Refer to "TUNER OPERATION".
3
Press w REC to start recording.
x PLAY is pressed simultaneously.
To stop recording, press s STOP.
To record from the built-in microphone (MIC), set FUNCTION to TAPE and start recording. Orient the
unit to the sound source.
Recording is monaural.
To prevent accidental erasure, break off the plastic tabs on the
cassette tape with a screwdriver or other pointed tool after recording.
To record on the tape again, cover the tab openings with adhesive
tape, etc.
Side A
Tab for side A
ENGLISH
En
5