Tuner Operation - Aiwa CS-P500 Operating Instructions Manual

QSOUND
VOLUME
OPE/BATT
FUNCTION
\
A

TUNER OPERATION

1
Set FUNCTION to RADIO.
2
Select a band with BAND.
AM – Tunes in AM broadcasts.
FM – Tunes in FM broadcasts in monaural.
FM STEREO – Tunes in FM broadcasts in stereo.
3
Tune to a station with TUNING.
4
Turn VOLUME to adjust the sound.
For better reception
FM
Extend the rod antenna and orient it
for the best reception.
NOTE
• If the FM stereo broadcast contains noise, set BAND to FM. Noise is reduced, although reception is
monaural.
• If a high-pitched sound is heard during recording from AM, set OSC on the rear of the unit to another
position.
• If the unit picks up noise from other electrical appliances nearby, like a TV or fluorescent lights, move
the unit away.
GENERAL
QSOUND system
This system provides a rich, three dimensional sound area for stereo sources. You can enjoy more
enhanced sound.
Press QSOUND.
• At higher volumes, turning QSOUND on may cause sound distortion. In this case, turn the volume
down.
To listen with the headphones, connect headphones with a stereo mini plug to the \ (Headphones) jack.
To turn off the unit, set FUNCTION to TAPE/RADIO OFF to turn off the OPE/BATT indicator.
4
ENGLISH
AM
The antenna is inside the unit. Position
the unit for the best reception.
A
TUNER OPERATION
MIC
B
TAPE OPERATION