Setting Child Lock Mode; Setting Power Save Mode - Aiwa HV-GX935Z Operating Instructions Manual

Setting Child Lock mode

During Child Lock mode, the buttons on the front panel of
the VCR are not operable.
CHILD LOCK
Press CHILD LOCK.
" " appears in the display window.
The buttons except Z STOP/EJECT on the VCR are not
operable. You can control the VCR only by the remote
control.
REC TIMER VCR
SP LP EP
To cancel Child Lock mode
Press CHILD LOCK again.
" " turns off in the display window.
23
ENGLISH
Z STOP/EJECT
Hi-Fi
M REM BILSAP ST

Setting Power Save mode

You can reduce the power spending during standby mode.
POWER
Press POWER on the VCR to turn off the VCR.
The VCR goes into Power Save mode and the display
window turns off.
The power consumption during Power Save mode is
approximately 2.1 W.
To cancel Power Save mode
Press POWER to turn on the VCR. You can use only the
POWER button on the VCR.
Notes
• If the VCR is set to make a timer recording, the VCR does
not go into Power Save mode even if you press POWER on
the VCR.
• If you press POWER on the remote control to turn off the
VCR, the VCR does not go into Power Save mode.
• During Power Save mode, you can not eject the inserted
tape.