Motorola NCAP-500 Series Installation Manual page 38

34 AP-6521 Series Access Point Installation Guide
22. Refer to the Add On-Board RADIUS Server Users field to set the following parameters
for a user account:
• Username - If adding a new user account, create a username up to X characters in
length. The username cannot be revised if modifying the user configuration. This is a
required parameter.
• Password - Provide (or modify) a password between X - X characters in length entered
each time a requesting client attempts access to the AP managed network using the
access point's onboard RADIUS server. This is a required parameter.
• Confirm Password - Re-enter (or modify) the password as a means of confirming the
password. This is a required parameter.
• Description - Optionally provide a description of the user account as means of further
differentiating it from others.
23. When completed, select Add User to commit a new user, Modify User to commit a
modified user or Reset to clear the screen without updating the configuration. Selecting
Reset clears the field of all entered user account information.
24. Select Next. The Initial AP Setup Wizard displays the Country/Date/Time screen to set
device deployment, administrative contact and system time information. The system time
can either be set manually or be supplied by a dedicated Network Time Protocol (NTP)
resource.