Setting Up The Computer - HP Pavilion 364 Quick Start Manual

Setting Up the Computer

Follow the steps shown on the setup poster to
set up the computer in your work area. Then
read the topics in this section that describe how
to turn on the computer for the first time, and
finish the registration process.
After registering, install any software programs
that came on CDs or DVDs included in the
computer box (select models only).
Note:
Some programs come preinstalled on the PC.
Before installing a program, check to see if it is
already installed on your system.
When you have completed these steps, you
may add any printer, scanner, camera, or other
peripheral equipment you have for your system.
Many peripherals, external devices, memory,
and add-in cards are Plug and Play.
Note:
Plug and Play describes the ability to add
or remove components without any special
procedures such as resetting jumpers and testing
for conflicts. When you add a Plug and Play
peripheral, the PC recognizes it and obtains the
best driver for the device.
5
Quick Start Guide