Download Print this page
Whirlpool ADP 2966 Quick Reference Manual
Whirlpool ADP 2966 Quick Reference Manual

Whirlpool ADP 2966 Quick Reference Manual

Advertisement

Quick Links

GB
ADP 2966
6th SENSE: Optimum wash results coupled with maximum
energy savings.
The two sensor-controlled programmes are recommended for
routine washes.
They use double sensor technology designed to ensure optimum
wash results with minimum water and energy consumption.
Programme selector
Start button
Indicator lamp lit while the dishwasher is operating.
Flashes when a fault occurs.
Switches off at the end of the programme.
Options
Half Load Button - Upper rack
Half Load Button - Lower rack
Load the upper or lower rack only.
This function can be used with any programme.
The corresponding indicator lamp lights up.
Press the button again to deactivate the half-load function.
Programme Symbol
and Temperature
Recommended programme for routine washes, for crockery
Normal 40 - 55° C
with little or no dried-on food.
Recommended programme for heavily soiled crockery, with
Intensive 60 - 70° C
dried-on food. Especially suitable for pans and saucepans.
Crockery to be washed later.
Pre-wash
Lightly soiled crockery with no dried-on food.
Rapid 40° C
Light soiling, especially glasses and cups.
Glasses 40° C
2)
Normally or heavily soiled crockery with dried-on food.
Standard 50° C
1)
Values may vary in relation to usage, e.g.: different loads, water
temperatures - above or below 15° C - as well as water hardness and power supply voltage etc.
2)
Reference programme for Test Institute and energy-label.
Quick Reference Guide
Further indications are given in the pages to follow and in the user instructions.
Programme selection and
recommended load type
Options
Delayed start button
The wash cycle can be programmed
to start after 1 - 24 hours.
Then press the Start button.
The dishwasher will start at
the set time.
Place the detergent in the:
small
large
compartment
compartment
X
X
X
X
-
-
-
X
-
X
X
X
(We reserve the right to make technical modifications)
Rinse aid level indicator
Add rinse aid.
Salt level indicator
Add regeneration salt; only add
regeneration salt immediately
before starting a wash programme.
Programme progress indicator
Pre-rinse / Pre-wash
Washing
Drying
Programme end
1)
Consumption
Normal Load /
(Half Load / Multizone)
Water
Energy
Time
(Litres)
(kWh)
(Min.)
(13.5)
(1.3)
(11.5)
(0.9)
(19.5)
(1.7)
(11.5)
(1.3)
5.0
(4.2)
0.02 (0.02)
9
(9)
13.0
(13.0)
0.85 (0.75)
30
(30)
12.5
(10.5)
0.82 (0.78)
60
(59)
16.0
(14.5)
1.20 (1.03)
130 (124)
5019 100 91283
(80)
(60)
(98)
(90)

Advertisement

loading

Summary of Contents for Whirlpool ADP 2966

  • Page 1 Quick Reference Guide ADP 2966 6th SENSE: Optimum wash results coupled with maximum energy savings. The two sensor-controlled programmes are recommended for routine washes. They use double sensor technology designed to ensure optimum wash results with minimum water and energy consumption.
  • Page 2 How to use the dishwasher Upper and lower rack 1. After loading the dishwasher, close the 6. Once the Start indicator lamp has • To raise: pull up the two side handles Lower rack door properly and open the water switched off, turn the programme until the rack clicks into place.
  • Page 3 Troubleshooting Guide Tips and advice • Before starting a wash programme, Crockery still dirty after washing: make sure that the spray arms can turn AFTER-SALES • Was the crockery loaded properly? • Arrange crockery so that items do not freely and are not impeded by crockery touch each other.
  • Page 4 Dishwasher loading instructions UPPER RACK LOWER RACK Half Load / Multizone Depending on the model, rack features may vary (see “Upper and lower rack” description).