Compaq Evo W8000 Hardware Reference Manual page 54

Compaq Evo Workstation W8000 Hardware Reference Guide
6. Install the second processor:
CAUTION: If only one processor is installed and you are replacing that
processor, be sure to install the processor in the primary processor
socket or your workstation will not function.
a. Open the processor socket by pulling up on the processor
retention lever
CAUTION: Processor pins are delicate and bend easily. Use extreme
care when placing the processor in the socket.
b. Insert the new processor
Ensure that the processor is locked into place and is not loose
in the socket.
c. Ensure the thermal pad is on the bottom of the heatsink
before setting the heatsink on top of the processor.
d. Install the two metal clips
processor retention module.
Ensure that the metal clips are firmly attached to the retaining tabs.
Installing a second processor
1
.
2
and close the retention lever.
4
that hold the heatsink to the
Hardware Upgrades
3
2-39