Changing From A Desktop To A Minitower Configuration - Compaq Evo W6000 Hardware Reference Manual

Changing from a Desktop to a Minitower Configuration

Compaq Evo Workstation W6000 Hardware Reference Guide
To change from a desktop to a minitower configuration:
1. Shut down the operating system properly, then turn off the
workstation and any external devices.
2. Disconnect the power cord from the grounded AC outlet, then
disconnect the network cable and any external devices from the
system.
3. Remove the workstation access panel. See "Removing the
Workstation Access Panel" in Chapter 2.
4. Remove the front bezel. See "Removing the Front Bezel" in
Chapter 2.
5. Disconnect all power and data cables from the drives in the 5.25-
inch drive bays.
Product Features
1-13