Using Computer Setup Utilities - Compaq Evo D310 MT Supplementary Manual

Using Computer Setup Utilities

✎
Computer Setup (F10) Utility Guide
To access the Computer Setup Utilities menu, complete the following
steps:
1. Turn on or restart the computer. If you are in Windows, click
Start > Shut Down > Restart the Computer.
2. When the F10 = Setup message is displayed in the lower-right
corner of the screen, press the
If you do not press the
must restart the computer again to access the utility.
3. Select your language from the list and press the
4. A choice of five headings appears in the Computer Setup Utilities
menu: File, Storage, Security, Power, and Advanced.
5. Use the arrow (left and right) keys to select the appropriate
heading. Use the arrow (up and down) keys to select the option
you want, then press the
Setup Utilities menu, press the
6. To apply and save changes, select File > Save Changes and Exit.
❏
If you have made changes that you do not want applied, select
Ignore Changes and Exit.
❏
To reset to factory settings, select Set Defaults and Exit. This
option will restore the original factory system defaults.
Computer Setup (F10) Utility Guide
key.
F10
key while the message is displayed, you
F10
key. To return to the Computer
Enter
key.
Esc
key.
Enter
3