Using The Realtek Hd Sound Effect Manager (6-Connector, Multi-Streaming Audio); Configuring The Realtek Hd Sound Effect Manager (6-Connector, Multi-Streaming Audio); Configuring Sound For Recording With The - HP Compaq Presario,Presario SR1010 Getting Started Manual

Using the Realtek HD Sound Effect Manager
(6-connector, Multi-streaming Audio)
1 Click Start on the taskbar; Control Panel; Sounds, Speech, and Audio
Devices; Realtek HD Sound Effect Manager.
2 Click a tab near the top of the window to see a control screen.
• Sound Effect — selects the Environment and the Equalizer settings. You can
select an environment, such as Under Water or Auditorium. To use the
Equalizer, click the Power button in the center of the circular equalizer control to
turn on the Equalizer. You can click a preset button, such as Pop or Live, or
manually adjust the settings and then save them for easy selection later.
• Mixer — allows control over volume, playback, mute, recording and
multi-streaming audio. Click the Multi-streaming setting button to set up
multi-streaming.
• Audio I/O — selects the number of speakers, shows the whether the plugs are
analog or digital, and selects the Digital Audio Output and Digital Input device.
Only speakers being used are displayed.
• Microphone — allows fine control over the microphone/recording quality.
Includes buttons for noise suppression and acoustic echo cancellation.
Configuring the Realtek HD Sound Effect
Manager (6-connector, Multi-streaming Audio)
1 Click Start on the taskbar; Control Panel; Sounds, Speech, and Audio
Devices; and Realtek HD Sound Effect Manager.
2 Click the Audio I/O tab.
3 Select the option describing the number of speakers in your system; for
example, 7.1 speakers.
Only connectors being used are shown; if the connector is not shown it means
that it is not used for the selected speaker configuration.
4 Click OK.
To hear DVD movies recorded with multi-channel audio from all speakers, change
the audio properties for WinDVD to match your speaker configuration (if your
InterVideo WinDVD program supports more than two channels). Refer to
"Configuring multi-channel audio output for the DVD player" on page 14.
To use a microphone or set up the PC for recording, see "Configuring sound for
recording with the Realtek HD Sound Effect Manager (6-connector, Multi-streaming
Audio)" on page 20.
To use Multi-streaming Audio, see "Configuring Multi-streaming Audio
(6 connector, Multi-streaming Audio)" on page 20.
19
Setting Up Sound