Radio Interference; Before Calling For Service - Oster OGMD21103 Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

1. If you have any questions about the grounding or electrical instructions, consult
a qualified electrician or service person.
2. Neither the manufacturer nor the dealer can accept any liability for damage to
the oven or personal injury resulting from failure to observe the electrical
connection procedures.
The wires in this cable main are colored in accordance with the following code:
Green and Yellow = EARTH
Blue = NEUTRAL
Brown = LIVE
Operation of the microwave oven can cause interference to your radio, TV, or
similar equipment. When there is interference, it may be reduced or eliminated by
taking the following measures:
1. Clean door and sealing surface of the oven.
2. Reorient the receiving antenna of radio or television.
3. Relocate the microwave oven with respect to the receiver.
4. Move the microwave oven away from the receiver.
5. Plug the microwave oven into a different outlet so that microwave oven and
receiver are on different branch circuits.

BEFORE CALLING FOR SERVICE

Before asking for service, please check each item below:
Check to ensure the oven is plugged in securely. If not, remove the plug from
the outlet, wait 10 seconds, and plug it in again securely.
Check for a blown circuit fuse or a tripped main circuit breaker. If these seem
to be operating properly, test the outlet with another appliance.
Check to ensure the control panel is programmed correctly and the timer is
set.
Check to ensure the door is securely closed, engaging the door lock system. If
the door is not properly closed, the microwave energy will not flow inside.
IF NONE OF THE ABOVE RECTIFIES THE SITUATION, THEN CONTACT A
QUALIFIED TECHNICIAN. DO NOT TRY TO ADJUST OR REPAIR THE OVEN
YOURSELF.

RADIO INTERFERENCE

5

Advertisement

Chapters

Table of Contents
loading

Table of Contents