ASROCK Creator WRX80 Manual page 49

2
C B A
C B A
C B
NUT2
Step 3
Before installing a M.2 (NGFF) SSD
module, please loosen the screws to
remove the M.2 heatsink.
*Please remove the protective films
on the bottom side of the M.2
heatsink before you install a M.2
SSD module.
Step 4
Gently insert the M.2 (NGFF) SSD
module into the M.2 slot. Please
be aware that the M.2 (NGFF) SSD
module only fits in one orientation.
*If you insert Type 22110 M.2 SSD,
please make sure that there is no
standoff being placed at the nut
location A or B.
20
o
Step 5
Tighten the screw that come with the
package with a screwdriver to secure
the module into place.
NUT1
WRX80 Creator
45