Talon TP-70BS Manual page 41

TP-70BS (Rev 3.0)
8. Fasten every knob's lock nut. (①-①, ②-①, ③-①, ④-①)
9. Dispense resist again to final check.
10. If value is not correct, go back to order NO.3.
⚫ REFERENCES FOR WORKING SEQUENCE
②, ③ ① ④ ② ③ ②
Fasten Adjust Adjust Adjust Adjust Adjust
1mm 2 times 3mm 2mm, 1sec
- 37 -
TALON TECH CO. LTD.