3 Service Navigation
3.1.
Service Information
This service manual contains technical information which will allow service personnel's to understand and service this model.
Please place orders using the parts list and not the drawing reference numbers.
If the circuit is changed or modified, this information will be followed by supplement service manual to be filed with original service
manual.
Firmware Update Procedure
3.1.1.
Write encrypted UPD bin to CD-R
Insert CD-R (with UPD bin) and
Set auto turn Off -> Cold Start
Start
Turn On main set
close
TOC reading
"CHECKING"
OK
Writing starts:
"0%" -> "20%" -> "40%" ->
"60%" -> "80%" -> 100%"
"GOOD" display 3 sec
End
NG
process end
10
"NO PLAY"