Powering On/Off Your Phone; Scanning For Channels; Listening To Fm Radio - Zte Blade V40 Quick Start Manual

Hide thumbs Also See for Blade V40:
Table of Contents

Advertisement

3.
Disconnect the charger when the battery is fully
charged.
NOTE:
If the battery is extremely low, you may be unable to
power on the phone even when it is being charged. In
this case, try again after charging the phone for at least
20 minutes. Contact the customer service if you still
cannot power on the phone after prolonged charging.

Powering On/Off Your Phone

Make sure the battery is charged before powering on.
Press and hold the Power key to turn on your
phone.
To power off, press and hold the Power key to open
the options menu, and touch
NOTE:
If the screen freezes or takes too long to respond, try
pressing and holding the Power key for over 10 seconds
to restart the phone.
FM Radio

Scanning for Channels

Plug in a wired headset and open FM Radio.
1.
2.
Touch
available channels and saves them to the channel
list.

Listening to FM Radio

Open FM Radio while the headset is connected.
1.
2.
Touch
You can also drag the red needle along the frequency
panel or touch
touch
or
NOTES:
> Scan > OK. Your phone scans for all
> All channels and select a channel.
or
to switch to other channels, or
to adjust the current channel frequency.
>
7
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

9045

Table of Contents