Initial Preparations
•
Unless you set the date, time, and local time zone, the [Date/Time]
screen will be displayed each time you turn the camera on. Specify
the correct information.
•
To set daylight saving time (1 hour ahead), choose
choose
Changing the Date and Time
Adjust the date and time as follows.
•
Date/time settings can be retained for about 3 weeks by the camera's built-in
date/time battery (backup battery) after the battery pack is removed.
•
The date/time battery will be charged in about 4 hours once you insert a charged
battery or connect the camera to an AC adapter kit (sold separately, p. 169),
even if the camera is left off.
•
Once the date/time battery is depleted, the [Date/Time] screen will be displayed
when you turn the camera on. Follow the steps on p. 17 to set the date and time.
18
by pressing the op buttons.
Access the camera menu.
Press the n button.
Choose [Date/Time].
Move the zoom lever to choose the 3 tab.
Press the op buttons to choose [Date/
Time], and then press the m button.
Change the date and time.
Follow step 2 on p. 17 to adjust the settings.
Press the n button to close the menu.
in step 2 and then