Protecting Images
Choosing Images Individually
•
Images will not be protected if you switch to Shooting mode or turn
the camera off before finishing the setup process in step 3.
136
Choose [Select].
Following step 2 on p. 135, choose [Select]
and press the m button.
Choose an image.
Press the qr buttons to choose an image,
and then press the m button.
displayed.
To cancel protection, press the m button
again.
is no longer displayed.
Repeat this process to specify other images.
Protect the images.
Press the n button. A confirmation
message is displayed.
Press the qr buttons to choose [OK], and
then press the m button.
is