Canon BJC-4300 Series User Manual page 94

The LPT.VXD file is located in the Windows/System directory. The LPT.VXD file will be
available from the Microsoft Web page.
To change the CMOS settings:
From Windows 95, click on Start
Go to Programs
Select Toshiba Utilities
You will have either TSETUP or HARDWARE SETUP UTILITY
For TSETUP Select Hardware Options
Select Parallel/ Printer
Select Standard bi-directional
Click OK
The computer will ask if you want to reboot-Select Yes
On both utilities you will have to save and reboot the system.
Note that selecting standard Bi-directional changes the CMOS setting to bi-directional.
Compaq Presario
Problem
A Compaq Presario running windows 95 will print only 3/4 page out of any Windows
application.
Cause
This occurs with Windows 95, Windows 3.1, and Win95 minidrivers.
Solution
Change the Resource Setting of LPT1.
Right Click on My Computer
Select Properties
Select Device Manager Tab
Double-click Ports (COM & LPT)
Double-click LPT1
Select Resources Tab
De-Select Automatic Settings
Change Basic Config from 0000 (0) to 0003 (3)
This step may require setting to 0002 (2) first, and then reboot in order to see
0003 (3)
New systems may go up to 9; use the setting for IRQ7 no DMA
Select OK
4300 Chapter 5 Page 6