Parts; Reinstalling The Printer; Assemble The Stand; Install The Printer - Canon imagePROGRAF iPF8300S Basic Guide No.3 Basic Manual

Reinstalling the Printer

The basic workfl ow for reinstalling the printer is as follows.
For detailed instructions, see the Setup Guide .

Assemble the stand

• The Stand must be assembled by at least two people on a fl at surface. Attempting assembly by yourself poses a
risk of injury or bending the Stand .
• When assembling the Stand , lock the casters.
In addition, always unlock the casters before moving the assembled Stand . Attempting to move the stand when the
casters are locked poses a risk of injury or damage to the location site.
Referring to the Printer Stand Setup Guide , assemble the Stand .

Install the printer

• The iPF8300S alone weighs approximately 111 kg (244.7 lb). Moving the printer requires at least six people, holding
it on both sides. Be careful to avoid back strain and other injuries.
• When moving the printer, fi rmly grasp the Carrying Handles (a)
under each side. The printer may be unsteady if you hold it at other
positions, which poses a risk of injury from dropping the printer.
Mount the printer on the assembled Stand and tighten the screws
fi rmly.
8
a