Remove Paper - Canon imagePROGRAF iPF8300S Basic Guide No.3 Basic Manual

Remove paper

1
Remove the paper.
Rolls: (→ , Removing the Roll from the Printer)
Sheets: (→ , Removing Sheets)
Access the Prep.MovePrinter menu
1
On the Tab Selection screen of the Control Panel , press
◄ or ► to select the Settings/Adj. tab (
• If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Set./Adj. Menu is displayed.
3
Press ▲ or ▼ to select Prep.MovePrinter , and then
press the OK button.
4
Press ▲ or ▼ to select the level of transfer, and then
press the OK button.
5
Press ▲ or ▼ to select Execute , and then press the OK
button to display the confi rmation screen.
6
Press ▲ or ▼ to select Yes , and then press the OK
button.
The printer is now prepared for transfer.
• Level 1
Once preparations are fi nished, a message on the
Display Screen requests you to turn off the printer.
Turn off and pack the printer. There is no need to
remove the ink tanks.
• Level 2 and Level 3
Once preparations are fi nished, a message on the
Display Screen requests you to open the Ink Tank
Cover .
Remove the ink tanks before packing the printer.
• If consumables must be replaced, the message Consumables must be replaced. Call for service. is
shown on the Display Screen and preparation is not possible. If this message is displayed, press the
OK button and contact your Canon dealer for assistance.
).
3
Preparing to Transfer the Printer
Ready
OK:Setting/Adj. Menu
Maint.C Remain.: 80%
Tot.Print Area(m2):
678