Direct Sending - Canon Color imageCLASS MF8450c Basic Operation Manual

Direct Sending

Direct Sending
The machine sends each page of the document to the destination as it is scanned.
The default setting is <Off>.
– If you do not select direct sending mode, memory sending mode is used.
– With direct sending mode, you can send a document of two or more pages only when using the feeder. You can only
send one page at a time when you place your original on the platen glass.
– You can specify only one destination at a time for direct sending mode.
– Memory sending is automatically set when using delayed sending or when multiple destinations are specified.
– If an error occurs or you cancel transmission in the direct sending mode, you can check how many pages have been sent
to the destination by printing the Activity Report or on the <Log> for fax on the System Monitor screen.
1
Place your originals.
2
Press
3
Use [▼], [▲] or
<Send/FAX>, then press [OK].
5-52
(Main Menu).
(Scroll Wheel) to select
4
Specify a destination.
For details about how to specify destinations, see
"Specifying Destinations, " on p. 5-30.
5
Use [▼], [▲] or
display <Direct Send Settings>, then
press [OK].
(Scroll Wheel) to