Table of Contents
Advertisement
Operating instructions
Last updated: 7月 29, 2022 10:27. Revision #5441
The AXC25/35 has been designed to only play:
Compact discs
Recordable CDs (CD-R)
Re-writable CDs (CD-RW) bearing the identification logo shown above.
Note: The CD-R/CD-RW discs should contain properly recorded TOC (Table of Contents) information so that they can be played back.
The AXC25/35 can only play the discs recorded in the CDDA format designed for music reproduction or those containing MP3 or WMA files. Do not
attempt to play a disc on this unit containing other data, such as a data CD-ROM for PCs.
LOADING AND UNLOADING DISCS
1. Using the front panel or remote control, press the 'Open/Close' button to open the disc tray.
2. Once the disc tray has fully opened, carefully place a disc into the tray with the label side facing upwards.
3. Close the disc tray by pressing the 'Open/Close' button again. When the tray has fully closed the AXC25/35 will read the disc and display the content
information.
4. The disc tray can be opened at any time during playback using either the front panel 'Open/Close' button, or the one located on the remote control.
Only remove an inserted disc after the disc tray has fully opened.
Important Information:
Do not put anything except for a compact disc into the disc tray as this can damage the mechanism.
Do not force the tray by hand during opening and closing operations.
To avoid dirt and dust entering the mechanism, keep the disc tray closed when not in use.
If the compact disc that you are attempting to load is badly scratched or dirty, the player may be unable to read or play it.
Never attempt to load multiple discs into the disc tray at any time.
12
Advertisement
Table of Contents
