Canon imagePROGRAF iPF6350 Setup Manual page 11

12
Click Quit.
14
Select the printer to setup and
click Next.
• To register the printer by entering its IP
address, click Registering IP Address.
MEMO
Enter the IP address of the desired
printer in IP Address and click Next.
17
Click OK.
• If the same model of printer is already
registered on the computer, a screen is
MEMO
displayed for printer selection. Select
the desired printer and click Next.
20
Double-click the iPFxxxx Manual
Installer icon on the CD-ROM. (iPFxxxx
represents the printer model.)
23
After reading the software license
agreement, click Continue .
26
After installation is completed, click Quit .
The User Manual is now installed.
This completes printer driver installation.
Next, select the printer to set up.
15
After entering your preferred name for
the printer in Printer Name and the
installation location in Location, click
Register.
18
The following screen is displayed and
paper information is updated. When the
paper information has been updated, the
screen is no longer displayed.
21
Select the region where the printer will
be used and the language of the user
manual to install, and then click OK .
24
Click Agree.
After you have finished setting up the printer and installing the printer driver and User
Manual, we recommend performing color calibration. Color calibration compensates for
MEMO
changes in color from individual variation among printheads or from the printing environment,
ensuring better color consistency. Perform color calibration using the provided Sample Paper,
which is compatible with this process. For information on other compatible paper, refer to the
Paper Reference Guide.
During color calibration, on the control panel's display screen, open
and select Adjust Printer - Calibration - Auto Adjust. The process of color calibration takes
about ten minutes.
11
13
Click Next.
16
Click Finish.
• To register another printer, click
Continue Registration, and repeat
MEMO
steps 14 to 16.
Install the User Manual
19
Next, install the User Manual.
Insert the provided User Manuals
CD-ROM in the CD-ROM drive.
22
Check the message and click Continue.
25
Click Install.
(settings/adj. tab)