Canon PIXMA MP990 Series Getting Started Manual page 15

3
Make sure that a pattern similar to the one shown in the illustration is
printed.
Remove the printed paper, then close the Paper Output Tray (D).
• When an error message is displayed on the LCD, press the OK button to clear
the error, then go to the next step. After the installation is complete, perform Print
Head Alignment by referring to "When Printing Becomes Faint or Colors are
Incorrect" in the on-screen manual: Basic Guide.
• The pattern is printed in black and blue.
4
E
D
Confirm the message on the LCD, then load plain paper into the Cassette (E) and
press the OK button.
The standby screen is displayed on the LCD.
Print Head Alignment is now complete.
• For details, refer to "Loading Paper" on page 48.
Align the Print Head
Hardware Setup