Postcard Mode; Embedding The Date In The Image Data - Canon PowerShot SD750 User Guide Advanced User Manual

Postcard Mode

You can shoot images with the optimal settings for postcards by
composing them inside the print area (width-to-height ratio of
approximately 3:2) shown in the LCD monitor.
1
FUNC. Menu
(Postcard).
See Menus and Settings (p. 22).
*Default setting.
The recording pixels are set to
(1600 x 1200) and the compression
to (Fine).
The area that will not print displays
in gray.
The digital zoom or the digital tele-converter cannot be used
in this mode.
For printing instructions, refer to the Direct Print User Guide.

Embedding the Date in the Image Data

You can embed the date in image data when
is selected.
1
(Rec.) Menu
[Date]/[Date & Time].
See Menus and Settings (p. 23).
*Default setting.
LCD Monitor Display
: [Off]
: [Date]/[Date & Time]
Ensure that the camera's date/time is set beforehand
(p. 27).
The date stamp cannot be deleted from the image
data once it has been embedded.
* (Recording Pixels)
[Date Stamp]
(Postcard)
[Off]*/
37