Configuring The Postcard Mode - Canon powershot SD870IS digital elph User Manual

EC231CUG-E.book Page 77 Thursday, June 7, 2007 10:22 AM

Configuring the Postcard Mode

See Functions Available in Each Shooting Mode (p. 238).
You can shoot images with the optimal settings for postcards by
composing them inside the print area (width-to-height ratio of
approximately 3:2) shown in the LCD monitor.
1
Select the Postcard Mode.
1. Press the button.
2. Use the or button to select
and choose with the
button.
3. Press the button.
• Approximately 2M recording pixels, and compression settings
are fixed to Fine.
• The area that will not print displays in gray.
The digital zoom or the digital tele-converter cannot be used in
this mode.
For printing instructions, refer to the Direct Print User Guide.
Commonly Used Shooting Functions
or
77