Shooting - Letting The Camera Select Settings; Auto Mode - Canon PowerShot Pro 90 IS Software Starter Manual

Shooting - Letting the Camera
Select Settings

Auto Mode

In this mode, all you have to do is press the shutter button and let the camera do
everything else.
• You can change the following settings.
- Resolution:
- Compression: Superfine / Fine* / Normal
- Flash:
- Drive Method: Single* / Self-Timer
- Digital Zoom: Off* / 2x / 4x
- Review:
- File No. Reset: Off* / On
* Default settings
• An image can be checked immediately after recording it. You can also change the
length of time images show in the LCD monitor after shooting, or set it so they do
not show at all (p. 42).
40

Shooting - Letting the Camera Select Settings

1
Turn the mode dial to
Turn the zoom ring to determine the
2
focal length (relative size of the subject
in the image).
Shoot the image.
3
• The shooting procedures are the same as those
described in steps 6-8 in the Quick Start section
(p. 9).
• The shutter speed and aperture settings are
automatically determined and show in the
display panel. They also appear in the LCD
monitor or viewfinder if it is on.
Large* / Medium / Small
Red-Eye Reduction Auto* / Auto / Off
Off / 2 sec.* / 10 sec.
.