Table of Contents
Advertisement
related DTC P0111 stored in the PCM.
- P0111 Intake Air Temperature Sensor 1 Circuit Range / Performance
For confirmation that the latest reflash has been performed to a vehicle you are working on verify
ROM ID using the tables in this TSB.
For vehicles not in affected VIN list, but with a customer complaint, perform the following repair
instructions outlined in this bulletin and submit a warranty claim per "customer complaint"
information below.
To correct this condition, the PCM should be reprogrammed using the GDS download as described
in this bulletin.
*NOTICE
A Service Action is a repair program without customer notification that is performed during the
warranty period. Any dealer requesting to perform this repair outside the warranty period will
require DPSM approval. Repair status for a VIN is provided on WebDCS (Service> Warranty
Coverage> Warranty Coverage Inquiry> Campaign Information). Not completed Recall/Service
Action reports are available on WebDCS (Consumer Affairs> Not Completed Recall> Recall VIN>
Select Report), which includes a list of affected vehicles.
This issue number is 5A053.
UPGRADE EVENT NAME
NOTICE
^ A fully charged battery is necessary before PCM upgrade can take place. DO NOT connect a
battery charger to the vehicle during PCM upgrade.
Make sure the blower motor is "OFF" during PCM upgrade.
^ All PCM upgrades must be done with the ignition key in the "ON" position.
^ Be careful not to disconnect any cables connected to the vehicle or GDS during the PCM
upgrade procedure.
^ DO NOT start the engine during PCM upgrade.
^ DO NOT turn the ignition key "OFF" or interrupt the power supply during PCM upgrade.
Advertisement
Table of Contents
