Page 1
Factory Workshop Manual Make Model Sorento 4wd Engine and year V6-3.5L (2011) Please navigate through the PDF using the options provided by OnlyManuals.com on the sidebar. This manual was submitted by Anonymous Date 1st January 2018...
Page 2
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Alarm Horn Relay > Component Information > Locations...
Page 8
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Alarm Horn Relay > Component Information > Locations > Page 9...
Page 9
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Alarm Module, (Vehicle Antitheft) > Component Information > Locations Alarm Module: Locations...
Page 10
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Keyless Entry Module > Component Information > Locations Keyless Entry Module: Locations...
Page 11
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Parking Assist Control Module > Component Information > Locations Parking Assist Control Module: Locations...
Page 12
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Body and Frame > Door Lock Relay > Component Information > Locations...
Page 13
Door Lock Relay: Locations ICM Relay Box...
Page 14
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Body and Frame > Keyless Entry Module > Component Information > Locations Keyless Entry Module: Locations...
Page 15
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Body and Frame > Seat Heater Relay > Component Information > Locations...
Page 17
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Locations Electronic Brake Control Module: Locations...
Page 18
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Brakes and Traction Control > Traction Control Module > Component Information > Technical Service Bulletins > Customer Interest for Traction Control Module: > CHA026 >...
Page 19
To correct this condition, the ECM should be reprogrammed using the GDS download as described in this bulletin. Service Procedure UPGRADE EVENT NAME NOTICE ^ A fully charged battery is necessary before ECU upgrade can take place. DO NOT connect a battery charger to the vehicle during ECU upgrade.
Page 20
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Brakes and Traction Control > Traction Control Module > Component Information > Technical Service Bulletins > Customer Interest for Traction Control Module: > CHA026...
Page 22
To verify the vehicle is affected, be sure to check the Calibration Identification of the vehicle's ECM's ROM ID and reference the Information Table as necessary. 1. Connect the power supply cable to the GDS tool. NOTICE If attempting to perform the ECU upgrade with the power supply cable disconnected from the GDS tool, be sure to check that the GDS tool is fully charged before ECU upgrade.
Page 23
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Brakes and Traction Control > Traction Control Module > Component Information > Technical Service Bulletins > Customer Interest for Traction Control Module: > CHA026 >...
Page 24
8. Enter the appropriate password from the table below, and then click OK. 9. Upgrade will begin and the progress of the upgrade will appear on the bar graph. Upgrade will occur until 100% is reached on the bar graph. Turn the ignition key OFF for10 seconds, place it back in the ON position and then click OK to continue according to Information displayed on the screen.
Page 25
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Brakes and Traction Control > Traction Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Traction Control Module: >...
Page 26
To correct this condition, the ECM should be reprogrammed using the GDS download as described in this bulletin. Service Procedure UPGRADE EVENT NAME NOTICE ^ A fully charged battery is necessary before ECU upgrade can take place. DO NOT connect a battery charger to the vehicle during ECU upgrade.
Page 27
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Brakes and Traction Control > Traction Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Traction Control...
Page 29
To verify the vehicle is affected, be sure to check the Calibration Identification of the vehicle's ECM's ROM ID and reference the Information Table as necessary. 1. Connect the power supply cable to the GDS tool. NOTICE If attempting to perform the ECU upgrade with the power supply cable disconnected from the GDS tool, be sure to check that the GDS tool is fully charged before ECU upgrade.
Page 30
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Brakes and Traction Control > Traction Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Traction Control Module: >...
Page 31
8. Enter the appropriate password from the table below, and then click OK. 9. Upgrade will begin and the progress of the upgrade will appear on the bar graph. Upgrade will occur until 100% is reached on the bar graph. Turn the ignition key OFF for10 seconds, place it back in the ON position and then click OK to continue according to Information displayed on the screen.
Page 32
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Cooling System > Radiator Cooling Fan Motor Relay > Component Information > Locations...
Page 33
Radiator Cooling Fan Motor Relay: Locations E/R Fuse And Relay Box View...
Page 34
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Cooling System > Radiator Cooling Fan Motor Relay > Component Information > Locations > Page 54...
Page 36
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Cooling System > Radiator Cooling Fan Motor Relay > Component Information > Locations > Page 55...
Page 38
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Cooling System > Radiator Cooling Fan Motor Relay > Component Information > Locations > Page 56...
Page 39
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - HVAC > Blower Motor Relay > Component Information > Locations...
Page 40
Blower Motor Relay: Locations E/R Fuse And Relay Box View...
Page 41
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - HVAC > Blower Motor Relay > Component Information > Locations > Page 61...
Page 54
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - HVAC > Control Module HVAC > Component Information > Locations Control Module HVAC: Locations...
Page 55
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Instrument Panel > Instrument Panel Control Module > Component Information > Diagrams > BCM-FK Instrument Panel Control Module: Diagrams BCM-FK...
Page 56
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Instrument Panel > Instrument Panel Control Module > Component Information > Diagrams > BCM-FK > Page 78 Instrument Panel Control Module: Diagrams BCM-ML...
Page 57
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Instrument Panel > Instrument Panel Control Module > Component Information > Diagrams > BCM-FK > Page 79 Instrument Panel Control Module: Diagrams BCM-MM...
Page 58
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Instrument Panel > Instrument Panel Control Module > Component Information > Diagrams > BCM-FK > Page 80 Instrument Panel Control Module: Diagrams BCM-MN...
Page 59
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Instrument Panel > Instrument Panel Control Module > Component Information > Diagrams > BCM-FK > Page 81...
Page 72
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Lighting and Horns > Dome Lamp Relay > Component Information > Locations Dome Lamp Relay: Locations...
Page 73
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Lighting and Horns > Horn Relay > Component Information > Locations...
Page 79
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Lighting and Horns > Horn Relay > Component Information > Locations > Page 101...
Page 80
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Power Distribution Module > Component Information > Locations Power Distribution Module: Locations...
Page 81
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Power Distribution Module > Component Information > Diagrams > Diagram Information and Instructions...
Page 82
Power Distribution Module: Diagram Information and Instructions Schematic Diagrams INTRODUCTION...
Page 83
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Power Distribution Module > Component Information > Diagrams > Diagram Information and Instructions > Page 108...
Page 84
1. Pages by system / Name of Schematic diagram - Each page is consisted of circuits by system. This schematic diagram includes the path of electricity flow, connection condition for each switch, and the function of other relevant circuits at once.
Page 85
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Power Distribution Module > Component Information > Diagrams > Diagram Information and Instructions > Page 109...
Page 86
- It shows the front of the connector on the harness side when not to the harness connector. The terminal number on each connector can be obtained by following the pattern used in (5) connector view and numbering order. Unused terminals are marked with an asterisk (*). 3.
Page 87
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Power Distribution Module > Component Information > Diagrams > Diagram Information and Instructions > Page 110...
7. HARNESS CLASSIFICATION Electrical wiring connectors are classified according to the wiring parts in the Harness Layouts. 8. CONNECTOR IDENTIFICATION A Connector identification symbol consists of a wiring harness location classification symbol corresponding to a wiring harness location and number corresponding to the connector. These connector locations can be found in the HARNESS LAYOUTS.
Page 89
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Power Distribution Module > Component Information > Diagrams > Diagram Information and Instructions > Page 111...
Page 90
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Power Distribution Module > Component Information > Diagrams > Diagram Information and Instructions > Page 112...
Page 92
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Power Distribution Module > Component Information > Diagrams > Diagram Information and Instructions > Page 113...
Page 93
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Power Distribution Module > Component Information > Diagrams > Diagram Information and Instructions > Page 114...
Page 94
TROUBLESHOOTING EQUIPMENT VOLTMETER AND TEST LAMP Use a test lamp or a voltmeter on circuits without solid-state units and use a test lamp to check for voltage. A test lamp is made up of a 12-volt light bulb with a pair of leads attached. After grounding one lead, touch the other lead to various points along the circuit where voltage should be present.
Page 95
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Power Distribution Module > Component Information > Diagrams > Diagram Information and Instructions > Page 115 Circuits which include any solid-state devices should be tested only with a 10-megaohm or higher impedance digital multimeter.
Page 96
A jumper wire is made up of an in-line fuse holder connected to a set of test leads. This tool is available with small clamp connectors providing adaption to most connectors without damage. CAUTION: Do not use a fuse with a higher rating than the specified fuse that protects the circuit being tested.
Page 97
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Power Distribution Module > Component Information > Diagrams > Diagram Information and Instructions > Page 116...
2. TESTING FOR CONTINUITY A. Disconnect the battery negative terminal. B. Connect one lead of a self-powered test lamp or ohmmeter to one end of the part of the circuit you wish to test. If you are using an ohmmeter, hold the leads together and adjust the ohmmeter to read zero ohms.
Page 99
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Power Distribution Module > Component Information > Diagrams > Diagram Information and Instructions > Page 117...
B. Connect the short finder across the fuse terminals. C. Close all switches in series in the circuit that is being testing. D. Turn on the short circuit locator. It sends pulses of current to the short. This creates a pulsing magnetic field around the wiring between the fuse box and the short.
Page 101
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Power Distribution Module > Component Information > Diagrams > Diagram Information and Instructions > Page 118...
Page 102
Power Distribution Module: Electrical Diagrams SD952-1 Power Distribution Module (PDM) (1)
Page 103
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Power Distribution Module > Component Information > Diagrams > Diagram Information and Instructions > Page 119...
Page 104
SD952-2 Power Distribution Module (PDM) (2)
Page 105
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Power Distribution Module > Component Information > Diagrams > Diagram Information and Instructions > Page 120...
Page 106
Power Distribution Module (PDM) (3) Connector Pin Outs Diagrams: Other diagrams referred to by SD number (i.e. SD130-4, etc.) within these diagrams can be found at Diagrams by Number. See: Diagrams/Electrical Diagrams/Diagrams By Number Locations: Location photographs (references to PHOTOS) referred to within these diagrams can be found via the photo number at the vehicle level under Locations by Photo Number.
Page 107
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Relay Box > Component Information > Locations > ICM Relay Box Relay Box: Locations ICM Relay Box...
Page 108
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Relay Box > Component Information > Locations > ICM Relay Box > Page 125 Relay Box: Locations PDM Relay Box (With Smart Key)
Page 109
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Relay Box > Component Information > Locations > Page 126...
Page 110
Relay Box: Application and ID Fuse & Relay Information Instrument Panel Module (IPM) View...
Page 111
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Relay Box > Component Information > Locations > Page 127...
Page 113
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Relay Box > Component Information > Locations > Page 128...
Page 115
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Relay Box > Component Information > Locations > Page 129...
Page 116
E/R Fuse And Relay Box Circuit Details...
Page 117
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Relay Box > Component Information > Locations > Page 130...
Page 118
E/R Fuse And Relay Box Circuit Diagram...
Page 119
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Relay Box > Component Information > Locations > Page 131...
Page 120
E/R Fuse And Relay Box Circuit Diagram...
Page 121
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Relay Box > Component Information > Locations > Page 132...
Page 123
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Power and Ground Distribution > Relay Box > Component Information > Locations > Page 133...
Page 125
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Body Control Module > Component Information > Locations > BCM...
Page 126
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Body Control Module > Component Information > Locations > BCM > Page 140...
Page 127
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins >...
Page 128
This bulletin provides the procedure to upgrade the Powertrain Control Module (PCM) of some 2011 Model Year Sorento (XM) vehicles equipped with 3.5L engine prior to December 7, 2010. Some vehicles may experience a Malfunction Indicator Lamp (MIL) illuminated with system-related DTC P0017 stored in the PCM.
Page 129
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins >...
Page 130
1. Connect the power supply cable to the GDS tool or to the diagnostic terminal with the GDS docked. *NOTICE If attempting to perform ECM upgrade with power supply cable disconnected from the GDS tool, be sure to check that the GDS tool is fully charged before ECM upgrade. If the GDS tool is not fully charged, failure to perform the ECM upgrade may occur.
Page 131
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins >...
Page 132
3. Connect the Main 16-pin DLC cable (GHDM - 241000) to the VCI.
Page 133
4. Connect the Main 16-pin DLC cable (GHDM - 241000) between the VCI and the OBD-II connector, located under the driver's side of the instrument panel. 5. With the ignition key ON, turn ON the VCI and GDS tool. Access the GDS vehicle identification number (VIN) screen and configure the vehicle using the VIN AUTO DETECT Function.
Page 134
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins >...
Page 135
*NOTICE VIN Inquiry data for this repair is provided for tracking purposes only. Kia retailers should reference SA075 when accessing the WebDCS system.
Page 136
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins >...
Page 137
related DTC P0111 stored in the PCM. - P0111 Intake Air Temperature Sensor 1 Circuit Range / Performance For confirmation that the latest reflash has been performed to a vehicle you are working on verify ROM ID using the tables in this TSB. For vehicles not in affected VIN list, but with a customer complaint, perform the following repair instructions outlined in this bulletin and submit a warranty claim per "customer complaint"...
Page 138
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins >...
Page 139
^ When the PCM upgrade is completed, turn the ignition "OFF" and wait 20 seconds before starting the engine.
Page 140
^ ONLY use approved PCM upgrade software designated for the correct model, year. ROM ID INFORMATION TABLES To verify the vehicle is affected, be sure to check the Calibration Identification of the vehicle's PCM ROM ID and reference the Information Table as necessary. 1.
Page 141
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins >...
Page 142
5. With the ignition key ON, turn ON the VCI and GDS tool. Access the GDS vehicle identification number (VIN) screen and configure the vehicle using the VIN AUTO DETECT Function.
Page 143
6. Once back at the GDS Main Screen, select ECU Upgrade from the bottom right-hand corner. Next select Auto Mode, and then Engine Perform the ECM/ECU upgrade in accordance with normal GDS tool ECM/ECU upgrade procedures. NOTICE Do NOT attempt to perform a Manual Mode upgrade unless Auto Mode fails. Always follow the instructions given on the GDS tool in either Auto or Manual mode.
Page 144
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins >...
Page 145
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 146
Engine Control Module: All Technical Service Bulletins Emissions - California Emissions Data Extraction...
Page 147
GROUP Engine NUMBER 090 MODEL 2011MY Sedona (VQ), Rio (JB) DATE February 2011 SUBJECT: DATA COLLECTION: EXTRACT CALIFORNIA EMISSIONS DATA FROM ECU (DC002) This bulletin provides information related to extracting "In use performance tracking" missions data from the engine control unit (ECU) in certain vehicles sold in California. The California Air Resource Board (GARB) requires this emissions data to be extracted from the ECUs of a number of customer owned 2011 model year vehicles with a minimum of 3000 accumulated miles without reprogramming or resetting.
Page 148
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 150
2. To start use the Global Diagnostic System (GDS). Begin by clicking on "ID Register". Click on "Auto VIN" or manually enter vehicle information on the next screen. *NOTICE GDS must be updated to version N-K-01-07-0010 or later to properly collect date. 3.
Page 151
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 153
5b. Write down the "Calibration ID" or "ROM ID" number for later form entry. Next go to the main screen by clicking on the "GDS" logo at the top left of the screen. 6. Then select "CARB OBD-II" under the "Diagnosis" tab.
Page 154
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 155
7. Click on "IN-USE Performance Tracking" found in the CARB OBD-II list at the bottom left of the screen. Then click the "Expand" button at the top right corner of "IN-USE Performance Tracking"...
Page 156
window. *NOTICE If all values indicate "Not Supported" or "0", check to make sure you have GDS software version N-K-01-07-0010 or later. If the software version is correct, and all values show "Not Supported" or "0", the vehicle will not qualify for this data collection, as it may have received a recent ECM Update or battery replacement/reset of the data values.
Page 157
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 158
9. Select "Scantool Area - Full" and click "Send to file". The GDS will set up a designation folder and file name to save the captured data. Please change the file name to include the model/engine,...
Page 159
the last 6 of the VIN and the date (mmddyyyy). Before saving, write down the file name and designation folder for further reference. Example 10. After saving the file, return to the GDS home page by clicking on "GDS" logo in the upper left hand corner.
Page 160
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 161
12. Enter all the information requested in the form including your name and email address.
Page 162
^ For System, enter "Engine". ^ For Subject, enter "Data Collection". ^ In the Description area, ^ Type "Group:" followed by the group number from the Vehicle Emission Control Information label in step 1. ^ Type "Calibration ID:" followed by the calibration ID obtained in step 5b. ^ Add current odometer mileage.
Page 163
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 164
14. Refer to the file name and destination from step 9.
Page 165
^ Navigate to: Local Disk (D:) / gvciData / Record / ^ Click on the folder for the vehicle ie., "Sportage (KM)". ^ Click on the folder containing the vehicle VIN. ^ Click on the file name. ^ Once the file name appears in the "File Name" box, click on the "Open" button. 15.
Page 166
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 167
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 168
SUBJECT: COMBINED TSB / SERVICE ACTION: MIL ON WITH DTC P0017 DTC LOGIC IMPROVEMENT (SA075) This bulletin provides the procedure to upgrade the Powertrain Control Module (PCM) of some 2011 Model Year Sorento (XM) vehicles equipped with 3.5L engine prior to December 7, 2010. Some vehicles may experience a Malfunction Indicator Lamp (MIL) illuminated with system-related DTC P0017 stored in the PCM.
Page 169
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 170
1. Connect the power supply cable to the GDS tool or to the diagnostic terminal with the GDS docked. *NOTICE If attempting to perform ECM upgrade with power supply cable disconnected from the GDS tool, be sure to check that the GDS tool is fully charged before ECM upgrade. If the GDS tool is not fully charged, failure to perform the ECM upgrade may occur.
Page 171
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 172
3. Connect the Main 16-pin DLC cable (GHDM - 241000) to the VCI.
Page 173
4. Connect the Main 16-pin DLC cable (GHDM - 241000) between the VCI and the OBD-II connector, located under the driver's side of the instrument panel. 5. With the ignition key ON, turn ON the VCI and GDS tool. Access the GDS vehicle identification number (VIN) screen and configure the vehicle using the VIN AUTO DETECT Function.
Page 174
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 175
*NOTICE VIN Inquiry data for this repair is provided for tracking purposes only. Kia retailers should reference SA075 when accessing the WebDCS system.
Page 176
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 177
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 178
To correct this condition, the PCM should be reprogrammed using the GDS download as described in this bulletin.
Page 180
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 181
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 184
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 185
2010. Some vehicles may experience a Malfunction Indicator Lamp (MIL) illuminated with system = related DTC P0111 stored in the PCM. - P0111 Intake Air Temperature Sensor 1 Circuit Range / Performance For confirmation that the latest reflash has been performed to a vehicle you are working on verify ROM ID using the tables in this TSB.
Page 186
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 187
^ When the PCM upgrade is completed, turn the ignition "OFF" and wait 20 seconds before starting the engine.
Page 188
^ ONLY use approved PCM upgrade software designated for the correct model, year. ROM ID INFORMATION TABLES To verify the vehicle is affected, be sure to check the Calibration Identification of the vehicle's PCM ROM ID and reference the Information Table as necessary. 1.
Page 189
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 190
5. With the ignition key ON, turn ON the VCI and GDS tool. Access the GDS vehicle identification number (VIN) screen and configure the vehicle using the VIN AUTO DETECT Function.
Page 191
6. Once back at the GDS Main Screen, select ECU Upgrade from the bottom right-hand corner. Next select Auto Mode, and then Engine Perform the ECM/ECU upgrade in accordance with normal GDS tool ECM/ECU upgrade procedures. NOTICE Do NOT attempt to perform a Manual Mode upgrade unless Auto Mode fails. Always follow the instructions given on the GDS tool in either Auto or Manual mode.
Page 192
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 193
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 194
Subject Sorento (XM) Transmission Adaptive Learning - Description Sorento (XM) Transmission Adaptive Learning This article gives information on setting the transaxle adaptive learning after a reflash or transaxle replacement has occurred. This can also be used for customer shift feel complaints. The Coolant temperature must be 161F (72C0 or higher and the Transaxle fluid temperature must be higher then 104F (40C) to begin the procedure.
Page 195
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 197
3. A/C OFF. 4. Repeat this procedure with 4 second delay before shifting the lever into another gear (N -> D, D -> N). 5. Repeat this procedure at least six times. Final or complete adaptive learning will take several miles at different temperature ranges to adjust for the customer driving style however the base setting is necessary to compensate for excessive tolerances in the clutch pack set.
Page 198
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins >...
Page 199
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins >...
Page 200
To correct this condition, the PCM should be reprogrammed using the GDS download as described in this bulletin.
Page 202
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins >...
Page 203
1. Connect the power supply cable to the GDS tool 2. Connect the USB cable between the VCI and the GDS tool 3. Connect the Main 16-pin DLC cable (GHDM - 241000) to the VCI 4. Connect the Main 16-pin DLC cable (GHDM - 241000) to the OBD-II connector, located under the drivers side of the instrument panel.
Page 204
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins >...
Page 205
before attempting to start the engine. 8. Check for Diagnostic Trouble Codes using the GDS and erase any DTCs stored such as EPS ESC and TPMS Due to CAN BUS multiple DTCs may be set during reprogramming. 9. Start the engine to confirm proper operation of the vehicle. AFFECTED PRODUCTION RANGE: SERVICE ACTION WARRANTY CLAIM INFORMATION:...
Page 206
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 207
Engine Control Module: All Technical Service Bulletins Emissions - California Emissions Data Extraction...
Page 208
GROUP Engine NUMBER 090 MODEL 2011MY Sedona (VQ), Rio (JB) DATE February 2011 SUBJECT: DATA COLLECTION: EXTRACT CALIFORNIA EMISSIONS DATA FROM ECU (DC002) This bulletin provides information related to extracting "In use performance tracking" missions data from the engine control unit (ECU) in certain vehicles sold in California. The California Air Resource Board (GARB) requires this emissions data to be extracted from the ECUs of a number of customer owned 2011 model year vehicles with a minimum of 3000 accumulated miles without reprogramming or resetting.
Page 209
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 211
2. To start use the Global Diagnostic System (GDS). Begin by clicking on "ID Register". Click on "Auto VIN" or manually enter vehicle information on the next screen. *NOTICE GDS must be updated to version N-K-01-07-0010 or later to properly collect date. 3.
Page 212
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 214
5b. Write down the "Calibration ID" or "ROM ID" number for later form entry. Next go to the main screen by clicking on the "GDS" logo at the top left of the screen. 6. Then select "CARB OBD-II" under the "Diagnosis" tab.
Page 215
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 216
7. Click on "IN-USE Performance Tracking" found in the CARB OBD-II list at the bottom left of the screen. Then click the "Expand" button at the top right corner of "IN-USE Performance Tracking"...
Page 217
window. *NOTICE If all values indicate "Not Supported" or "0", check to make sure you have GDS software version N-K-01-07-0010 or later. If the software version is correct, and all values show "Not Supported" or "0", the vehicle will not qualify for this data collection, as it may have received a recent ECM Update or battery replacement/reset of the data values.
Page 218
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 219
9. Select "Scantool Area - Full" and click "Send to file". The GDS will set up a designation folder and file name to save the captured data. Please change the file name to include the model/engine,...
Page 220
the last 6 of the VIN and the date (mmddyyyy). Before saving, write down the file name and designation folder for further reference. Example 10. After saving the file, return to the GDS home page by clicking on "GDS" logo in the upper left hand corner.
Page 221
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 222
12. Enter all the information requested in the form including your name and email address.
Page 223
^ For System, enter "Engine". ^ For Subject, enter "Data Collection". ^ In the Description area, ^ Type "Group:" followed by the group number from the Vehicle Emission Control Information label in step 1. ^ Type "Calibration ID:" followed by the calibration ID obtained in step 5b. ^ Add current odometer mileage.
Page 224
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 225
14. Refer to the file name and destination from step 9.
Page 226
^ Navigate to: Local Disk (D:) / gvciData / Record / ^ Click on the folder for the vehicle ie., "Sportage (KM)". ^ Click on the folder containing the vehicle VIN. ^ Click on the file name. ^ Once the file name appears in the "File Name" box, click on the "Open" button. 15.
Page 227
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 228
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 229
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 230
To correct this condition, the PCM should be reprogrammed using the GDS download as described in this bulletin.
Page 232
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 233
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 236
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 237
Subject Sorento (XM) Transmission Adaptive Learning - Description Sorento (XM) Transmission Adaptive Learning This article gives information on setting the transaxle adaptive learning after a reflash or transaxle replacement has occurred. This can also be used for customer shift feel complaints. The Coolant temperature must be 161F (72C0 or higher and the Transaxle fluid temperature must be higher then 104F (40C) to begin the procedure.
Page 238
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 240
3. A/C OFF. 4. Repeat this procedure with 4 second delay before shifting the lever into another gear (N -> D, D -> N). 5. Repeat this procedure at least six times. Final or complete adaptive learning will take several miles at different temperature ranges to adjust for the customer driving style however the base setting is necessary to compensate for excessive tolerances in the clutch pack set.
Page 241
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 243
2. To start use the Global Diagnostic System (GDS). Begin by clicking on "ID Register". Click on "Auto VIN" or manually enter vehicle information on the next screen. *NOTICE GDS must be updated to version N-K-01-07-0010 or later to properly collect date. 3.
Page 244
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 246
5b. Write down the "Calibration ID" or "ROM ID" number for later form entry. Next go to the main screen by clicking on the "GDS" logo at the top left of the screen. 6. Then select "CARB OBD-II" under the "Diagnosis" tab.
Page 247
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 248
7. Click on "IN-USE Performance Tracking" found in the CARB OBD-II list at the bottom left of the screen. Then click the "Expand" button at the top right corner of "IN-USE Performance Tracking"...
Page 249
window. *NOTICE If all values indicate "Not Supported" or "0", check to make sure you have GDS software version N-K-01-07-0010 or later. If the software version is correct, and all values show "Not Supported" or "0", the vehicle will not qualify for this data collection, as it may have received a recent ECM Update or battery replacement/reset of the data values.
Page 250
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 251
9. Select "Scantool Area - Full" and click "Send to file". The GDS will set up a designation folder and file name to save the captured data. Please change the file name to include the model/engine,...
Page 252
the last 6 of the VIN and the date (mmddyyyy). Before saving, write down the file name and designation folder for further reference. Example 10. After saving the file, return to the GDS home page by clicking on "GDS" logo in the upper left hand corner.
Page 253
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 254
12. Enter all the information requested in the form including your name and email address.
Page 255
^ For System, enter "Engine". ^ For Subject, enter "Data Collection". ^ In the Description area, ^ Type "Group:" followed by the group number from the Vehicle Emission Control Information label in step 1. ^ Type "Calibration ID:" followed by the calibration ID obtained in step 5b. ^ Add current odometer mileage.
Page 256
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 257
14. Refer to the file name and destination from step 9.
Page 258
^ Navigate to: Local Disk (D:) / gvciData / Record / ^ Click on the folder for the vehicle ie., "Sportage (KM)". ^ Click on the folder containing the vehicle VIN. ^ Click on the file name. ^ Once the file name appears in the "File Name" box, click on the "Open" button. 15.
Page 259
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 260
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 261
SUBJECT: COMBINED TSB / SERVICE ACTION: MIL ON WITH DTC P0017 DTC LOGIC IMPROVEMENT (SA075) This bulletin provides the procedure to upgrade the Powertrain Control Module (PCM) of some 2011 Model Year Sorento (XM) vehicles equipped with 3.5L engine prior to December 7, 2010. Some vehicles may experience a Malfunction Indicator Lamp (MIL) illuminated with system-related DTC P0017 stored in the PCM.
Page 262
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 263
1. Connect the power supply cable to the GDS tool or to the diagnostic terminal with the GDS docked. *NOTICE If attempting to perform ECM upgrade with power supply cable disconnected from the GDS tool, be sure to check that the GDS tool is fully charged before ECM upgrade. If the GDS tool is not fully charged, failure to perform the ECM upgrade may occur.
Page 264
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 265
3. Connect the Main 16-pin DLC cable (GHDM - 241000) to the VCI.
Page 266
4. Connect the Main 16-pin DLC cable (GHDM - 241000) between the VCI and the OBD-II connector, located under the driver's side of the instrument panel. 5. With the ignition key ON, turn ON the VCI and GDS tool. Access the GDS vehicle identification number (VIN) screen and configure the vehicle using the VIN AUTO DETECT Function.
Page 267
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 268
*NOTICE VIN Inquiry data for this repair is provided for tracking purposes only. Kia retailers should reference SA075 when accessing the WebDCS system.
Page 269
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 270
2010. Some vehicles may experience a Malfunction Indicator Lamp (MIL) illuminated with system = related DTC P0111 stored in the PCM. - P0111 Intake Air Temperature Sensor 1 Circuit Range / Performance For confirmation that the latest reflash has been performed to a vehicle you are working on verify ROM ID using the tables in this TSB.
Page 271
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 272
^ When the PCM upgrade is completed, turn the ignition "OFF" and wait 20 seconds before starting the engine.
Page 273
^ ONLY use approved PCM upgrade software designated for the correct model, year. ROM ID INFORMATION TABLES To verify the vehicle is affected, be sure to check the Calibration Identification of the vehicle's PCM ROM ID and reference the Information Table as necessary. 1.
Page 274
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 275
5. With the ignition key ON, turn ON the VCI and GDS tool. Access the GDS vehicle identification number (VIN) screen and configure the vehicle using the VIN AUTO DETECT Function.
Page 276
6. Once back at the GDS Main Screen, select ECU Upgrade from the bottom right-hand corner. Next select Auto Mode, and then Engine Perform the ECM/ECU upgrade in accordance with normal GDS tool ECM/ECU upgrade procedures. NOTICE Do NOT attempt to perform a Manual Mode upgrade unless Auto Mode fails. Always follow the instructions given on the GDS tool in either Auto or Manual mode.
Page 277
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 278
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 280
3. A/C OFF. 4. Repeat this procedure with 4 second delay before shifting the lever into another gear (N -> D, D -> N). 5. Repeat this procedure at least six times. Final or complete adaptive learning will take several miles at different temperature ranges to adjust for the customer driving style however the base setting is necessary to compensate for excessive tolerances in the clutch pack set.
Page 281
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > Page...
Page 282
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Main Relay (Computer/Fuel System) > Component Information > Locations...
Page 283
Main Relay (Computer/Fuel System): Locations E/R Fuse And Relay Box View...
Page 284
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Main Relay (Computer/Fuel System) > Component Information > Locations > Page 264...
Page 285
E/R Fuse And Relay Box Circuit Details...
Page 286
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Main Relay (Computer/Fuel System) > Component Information > Locations > Page 265...
Page 294
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Fuel Delivery and Air Induction > Main Relay (Computer/Fuel System) > Component Information > Locations...
Page 295
Main Relay (Computer/Fuel System): Locations E/R Fuse And Relay Box View...
Page 296
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Fuel Delivery and Air Induction > Main Relay (Computer/Fuel System) > Component Information > Locations > Page 275...
Page 297
E/R Fuse And Relay Box Circuit Details...
Page 298
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Fuel Delivery and Air Induction > Main Relay (Computer/Fuel System) > Component Information > Locations > Page 276...
Page 300
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Restraint Systems > Air Bag Control Module > Component Information > Locations Air Bag Control Module: Locations...
Page 301
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Restraint Systems > Seat Occupant Classification Module - Air Bag > Component Information > Locations Seat Occupant Classification Module - Air Bag: Locations...
Page 302
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Starting and Charging > Starter Relay > Component Information > Locations...
Page 304
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Starting and Charging > Starter Relay > Component Information > Locations > Page 288...
Page 305
E/R Fuse And Relay Box Circuit Details...
Page 306
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Starting and Charging > Starter Relay > Component Information > Locations > Page 289...
Page 307
E/R Fuse And Relay Box Circuit Diagram...
Page 308
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Starting and Charging > Starter Relay > Component Information > Locations > Page 290...
Page 309
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Steering and Suspension > Relays and Modules - Wheels and Tires > Tire Pressure Module > Component Information > Locations Tire Pressure Module: Locations...
Page 310
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Transmission and Drivetrain > Relays and Modules - A/T > Control Module, A/T > Component Information > Technical Service Bulletins > A/T - Transmission Adaptive Learning...
Page 311
- Description Sorento (XM) Transmission Adaptive Learning This article gives information on setting the transaxle adaptive learning after a reflash or transaxle replacement has occurred. This can also be used for customer shift feel complaints. The Coolant temperature must be 161F (72C0 or higher and the Transaxle fluid temperature must be higher then 104F (40C) to begin the procedure.
Page 312
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Transmission and Drivetrain > Relays and Modules - A/T > Control Module, A/T > Component Information > Technical Service Bulletins > A/T - Transmission Adaptive Learning...
Page 314
3. A/C OFF. 4. Repeat this procedure with 4 second delay before shifting the lever into another gear (N -> D, D -> N). 5. Repeat this procedure at least six times. Final or complete adaptive learning will take several miles at different temperature ranges to adjust for the customer driving style however the base setting is necessary to compensate for excessive tolerances in the clutch pack set.
Page 315
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Transmission and Drivetrain > Relays and Modules - Differential > Control Unit, Differential Lock > Component Information > Locations Control Unit: Locations...
Page 316
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Windows and Glass > Heated Glass Element Relay > Component Information > Locations...
Page 317
Heated Glass Element Relay: Locations E/R Fuse And Relay Box View...
Page 318
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Windows and Glass > Heated Glass Element Relay > Component Information > Locations > Page 311...
Page 319
E/R Fuse And Relay Box Circuit Details...
Page 320
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Windows and Glass > Heated Glass Element Relay > Component Information > Locations > Page 312...
Page 321
E/R Fuse And Relay Box Circuit Diagram...
Page 322
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Windows and Glass > Heated Glass Element Relay > Component Information > Locations > Page 313...
Page 323
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Windows and Glass > Power Window Control Module > Component Information > Locations Power Window Control Module: Locations...
Page 324
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Wiper and Washer Systems > Wiper Blade Heater Relay > Component Information > Locations...
Page 326
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Wiper and Washer Systems > Wiper Blade Heater Relay > Component Information > Locations > Page 321...
Page 327
E/R Fuse And Relay Box Circuit Details...
Page 328
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Wiper and Washer Systems > Wiper Blade Heater Relay > Component Information > Locations > Page 322...
Page 329
E/R Fuse And Relay Box Circuit Diagram...
Page 330
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Wiper and Washer Systems > Wiper Blade Heater Relay > Component Information > Locations > Page 323...
Page 331
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Wiper and Washer Systems > Wiper Relay > Component Information > Locations...
Page 339
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Relays and Modules > Relays and Modules - Wiper and Washer Systems > Wiper Relay > Component Information > Locations > Page 330...
Page 340
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Accessories and Optional Equipment > Hood Sensor/Switch (For Alarm) > Component Information > Locations Hood Sensor/Switch (For Alarm): Locations...
Page 341
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Accessories and Optional Equipment > Parking Assist Distance Sensor > Component Information > Locations Parking Assist Distance Sensor: Locations...
Page 342
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Accessories and Optional Equipment > Parking Assist Switch > Component Information > Locations Parking Assist Switch: Locations...
Page 343
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Accessories and Optional Equipment > Steering Mounted Controls Assembly > Component Information > Locations Steering Mounted Controls Assembly: Locations...
Page 344
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Body and Frame > Fuel Door Switch > Component Information > Locations Fuel Door Switch: Locations...
Page 345
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Body and Frame > Hood Switch / Sensor > Hood Sensor/Switch (For Alarm) > Component Information > Locations Hood Sensor/Switch (For Alarm): Locations...
Page 346
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Body and Frame > Power Mirror Switch > Component Information > Locations Power Mirror Switch: Locations...
Page 347
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Body and Frame > Power Seat Switch > Component Information > Locations Power Seat Switch: Locations...
Page 348
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Body and Frame > Seat Heater Switch > Component Information > Locations Seat Heater Switch: Locations...
Page 349
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Body and Frame > Sunroof / Moonroof Switch > Component Information > Locations Sunroof / Moonroof Switch: Locations...
Page 350
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Body and Frame > Trunk / Liftgate Switch > Component Information > Locations Trunk / Liftgate Switch: Locations...
Page 351
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Brake Fluid Level Sensor/Switch > Component Information > Locations Brake Fluid Level Sensor/Switch: Locations...
Page 352
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Parking Brake Warning Switch > Component Information > Locations Parking Brake Warning Switch: Locations...
Page 353
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Traction Control Switch > Component Information > Locations Traction Control Switch: Locations...
Page 354
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Wheel Speed Sensor > Component Information > Locations > Front Wheel Sensor LH Wheel Speed Sensor: Locations Front Wheel Sensor LH...
Page 355
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Wheel Speed Sensor > Component Information > Locations > Front Wheel Sensor LH > Page 382...
Page 356
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Wheel Speed Sensor > Component Information > Locations > Front Wheel Sensor LH > Page 383...
Page 357
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Wheel Speed Sensor > Component Information > Locations > Front Wheel Sensor LH > Page 384...
Page 358
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Yaw Rate Sensor > Component Information > Locations Yaw Rate Sensor: Locations...
Page 359
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Cooling System > Engine - Coolant Temperature Sensor/Switch > Component Information > Locations Engine - Coolant Temperature Sensor/Switch: Locations...
Page 360
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Engine > Oil Pressure Sender > Component Information > Locations Oil Pressure Sender: Locations...
Page 361
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Engine > Oil Temperature Sensor/Switch, Engine > Component Information > Locations Oil Temperature Sensor/Switch: Locations...
Page 362
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - HVAC > Ambient Temperature Sensor / Switch HVAC > Component Information > Locations Ambient Temperature Sensor / Switch HVAC: Locations...
Page 363
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - HVAC > Blower Motor Switch > Component Information > Locations Blower Motor Switch: Locations...
Page 364
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - HVAC > Cabin Temperature Sensor / Switch > Component Information > Locations Cabin Temperature Sensor / Switch: Locations...
Page 365
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - HVAC > Evaporator Temperature Sensor / Switch > Component Information > Locations Evaporator Temperature Sensor / Switch: Locations...
Page 366
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - HVAC > Refrigerant Pressure Sensor / Switch, HVAC > Component Information > Locations Refrigerant Pressure Sensor / Switch: Locations...
Page 367
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - HVAC > Solar Sensor, HVAC > Component Information > Locations Solar Sensor: Locations...
Page 368
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Instrument Panel > Door Switch > Component Information > Locations > Door Warning Switch (W/O Smart Key) Door Switch: Locations Door Warning Switch (W/O Smart Key)
Page 369
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Instrument Panel > Door Switch > Component Information > Locations > Door Warning Switch (W/O Smart Key) > Page 423 Door Switch: Locations Driver Door Switch...
Page 370
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Instrument Panel > Door Switch > Component Information > Locations > Door Warning Switch (W/O Smart Key) > Page 424 Door Switch: Locations Passenger Door Switch...
Page 371
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Instrument Panel > Door Switch > Component Information > Locations > Door Warning Switch (W/O Smart Key) > Page 425 Door Switch: Locations Rear Door Switch LH...
Page 372
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Instrument Panel > Door Switch > Component Information > Locations > Door Warning Switch (W/O Smart Key) > Page 426 Door Switch: Locations Rear Door Switch RH...
Page 373
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Instrument Panel > Fuel Gauge Sender > Component Information > Locations Fuel Gauge Sender: Locations...
Page 374
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Instrument Panel > Parking Brake Warning Switch > Component Information > Locations Parking Brake Warning Switch: Locations...
Page 375
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Lighting and Horns > Ambient Light Sensor > Component Information > Locations Ambient Light Sensor: Locations...
Page 376
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Lighting and Horns > Brake Light Switch > Component Information > Locations Brake Light Switch: Locations...
Page 377
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Lighting and Horns > Combination Switch > Component Information > Locations > Multifunction Switch Combination Switch: Locations Multifunction Switch...
Page 378
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Lighting and Horns > Combination Switch > Component Information > Locations > Multifunction Switch > Page 444 Combination Switch: Locations Multifunction Switch (Wiper)
Page 379
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Lighting and Horns > Door Switch > Component Information > Locations > Door Warning Switch (W/O Smart Key) Door Switch: Locations Door Warning Switch (W/O Smart Key)
Page 380
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Lighting and Horns > Door Switch > Component Information > Locations > Door Warning Switch (W/O Smart Key) > Page 449...
Page 381
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Lighting and Horns > Door Switch > Component Information > Locations > Door Warning Switch (W/O Smart Key) > Page 450...
Page 382
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Lighting and Horns > Door Switch > Component Information > Locations > Door Warning Switch (W/O Smart Key) > Page 451...
Page 383
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Lighting and Horns > Door Switch > Component Information > Locations > Door Warning Switch (W/O Smart Key) > Page 452...
Page 384
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Lighting and Horns > Headlamp Switch > Component Information > Locations Headlamp Switch: Locations...
Page 385
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Accelerator Pedal Position Sensor > Component Information > Technical...
Page 386
Accelerator Pedal Position Sensor: Technical Service Bulletins Engine Controls - Engine Management DTCs P2135 and P2138...
Page 387
Model All Model Group Fuel System(14) Number KT2008090302 Date Wednesday, September 03, 2008 Area N.America Subject Engine Management DTCs - P2135 and P2138 - Description KMA has found in some cases that the Accelerator Position Sensor (APS) as part of the accelerator pedal assembly is being replaced unneccessarily for DTC P2135.
Page 388
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Accelerator Pedal Position Sensor > Component Information > Technical Service Bulletins >...
Page 389
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Barometric Pressure Switch > Component Information > Locations Barometric Pressure Switch: Locations...
Page 390
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Battery Current Sensor > Component Information > Locations Battery Current Sensor: Locations...
Page 391
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Battery Temperature Sensor > Component Information > Locations Battery Temperature Sensor: Locations...
Page 392
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Camshaft Position Sensor > Component Information > Locations > Camshaft...
Page 393
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Camshaft Position Sensor > Component Information > Locations > Camshaft Position Sensor #1 >...
Page 394
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Camshaft Position Sensor > Component Information > Locations > Camshaft Position Sensor #1 >...
Page 395
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Crankshaft Position Sensor > Component Information > Technical Service Bulletins >...
Page 396
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Crankshaft Position Sensor > Component Information > Technical Service Bulletins >...
Page 397
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > EGR Valve Position Sensor > Component Information > Locations...
Page 398
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Fuel Tank Pressure Sensor > Component Information > Locations...
Page 399
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Knock Sensor > Component Information > Locations > Knock Sensor # 1...
Page 400
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Knock Sensor > Component Information > Locations > Knock Sensor # 1 >...
Page 401
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Manifold Pressure/Vacuum Sensor > Component Information > Locations Manifold Pressure/Vacuum Sensor: Locations...
Page 402
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Oxygen Sensor > Component Information > Locations > Oxygen Sensor #2...
Page 403
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Oxygen Sensor > Component Information > Locations > Oxygen Sensor #2 (B2/S1) >...
Page 404
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Oxygen Sensor > Component Information > Locations > Oxygen Sensor #2 (B2/S1) >...
Page 405
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Power Steering Pressure Switch > Component Information > Locations...
Page 406
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Throttle Position Sensor > Component Information > Locations Throttle Position Sensor: Locations...
Page 407
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Transmission Position Switch/Sensor, A/T > Component Information > Locations...
Page 408
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram...
Page 409
Vehicle Speed Sensor: Diagram Information and Instructions...
Page 411
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram...
Page 412
1. Pages by system / Name of Schematic diagram...
Page 413
- Each page is consisted of circuits by system. This schematic diagram includes the path of electricity flow, connection condition for each switch, and the function of other relevant circuits at once. It is applicable to real service work. - It is very important to understand relevant circuits exactly before troubleshooting diagnosis. - Circuits by system depends upon part number and are indicated on schematic diagram index.
Page 414
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram...
Page 415
- It shows the front of the connector on the harness side when not to the harness connector. The terminal number on each connector can be obtained by following the pattern used in (5) connector...
Page 416
view and numbering order. Unused terminals are marked with an asterisk (*). 3. Connector configurations (connection between harnesses) - When connecting the harness with connector between harnesses, it shows female and male connectors and indicates them on the connector configurations group. EM02 4.
Page 417
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram...
Electrical wiring connectors are classified according to the wiring parts in the Harness Layouts. 8. CONNECTOR IDENTIFICATION A Connector identification symbol consists of a wiring harness location classification symbol corresponding to a wiring harness location and number corresponding to the connector. These connector locations can be found in the HARNESS LAYOUTS.
Page 420
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram Information and Instructions >...
Page 421
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram...
Page 423
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram Information and Instructions >...
Page 424
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram Information and Instructions >...
Page 425
TROUBLESHOOTING EQUIPMENT VOLTMETER AND TEST LAMP Use a test lamp or a voltmeter on circuits without solid-state units and use a test lamp to check for voltage. A test lamp is made up of a 12-volt light bulb with a pair of leads attached. After grounding one lead, touch the other lead to various points along the circuit where voltage should be present.
Page 426
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram Information and Instructions >...
Page 427
A jumper wire is made up of an in-line fuse holder connected to a set of test leads. This tool is available with small clamp connectors providing adaption to most connectors without damage. CAUTION: Do not use a fuse with a higher rating than the specified fuse that protects the circuit being tested.
Page 428
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram...
A. Disconnect the battery negative terminal. B. Connect one lead of a self-powered test lamp or ohmmeter to one end of the part of the circuit you wish to test. If you are using an ohmmeter, hold the leads together and adjust the ohmmeter to read zero ohms. C.
Page 431
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram...
Page 432
B. Connect the short finder across the fuse terminals. C. Close all switches in series in the circuit that is being testing. D. Turn on the short circuit locator. It sends pulses of current to the short. This...
creates a pulsing magnetic field around the wiring between the fuse box and the short. E. Beginning at the fuse box, slowly move the short finder along the circuit wiring. The meter will show current pulses through sheet metal and body trim.
Page 434
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram...
Page 437
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram...
Page 438
Vehicle Speed System (2) Connector Pin Outs...
Page 439
Diagrams: Other diagrams referred to by SD number (i.e. SD130-4, etc.) within these diagrams can be found at Diagrams by Number. See: Diagrams/Electrical Diagrams/Diagrams By Number Locations: Location photographs (references to PHOTOS) referred to within these diagrams can be found via the photo number at the vehicle level under Locations by Photo Number. See: Locations/Component Locations...
Page 440
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Emission Control Systems > EGR Valve Position Sensor > Component Information > Locations EGR Valve Position Sensor: Locations...
Page 441
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Fuel Delivery and Air Induction > Accelerator Pedal Position Sensor > Component Information > Technical...
Page 442
Accelerator Pedal Position Sensor: Technical Service Bulletins Engine Controls - Engine Management DTCs P2135 and P2138...
Page 443
Model All Model Group Fuel System(14) Number KT2008090302 Date Wednesday, September 03, 2008 Area N.America Subject Engine Management DTCs - P2135 and P2138 - Description KMA has found in some cases that the Accelerator Position Sensor (APS) as part of the accelerator pedal assembly is being replaced unneccessarily for DTC P2135.
Page 444
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Fuel Delivery and Air Induction > Accelerator Pedal Position Sensor > Component Information > Technical Service Bulletins >...
Page 445
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Fuel Delivery and Air Induction > Throttle Position Sensor > Component Information > Locations...
Page 446
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Ignition System > Camshaft Position Sensor > Component Information > Locations > Camshaft Position Sensor...
Page 447
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Ignition System > Camshaft Position Sensor > Component Information > Locations > Camshaft Position Sensor #1 >...
Page 448
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Ignition System > Camshaft Position Sensor > Component Information > Locations > Camshaft Position Sensor #1 >...
Page 449
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Ignition System > Crankshaft Position Sensor > Component Information > Technical Service Bulletins > Engine...
Page 450
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Ignition System > Crankshaft Position Sensor > Component Information > Technical Service Bulletins > Page...
Page 451
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Ignition System > Ignition Switch > Component Information > Locations Ignition Switch: Locations...
Page 452
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Ignition System > Knock Sensor > Component Information > Locations > Knock Sensor # 1...
Page 453
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Ignition System > Knock Sensor > Component Information > Locations > Knock Sensor # 1 > Page 560...
Page 454
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Restraint Systems > Impact Sensor > Component Information > Locations > Driver Pressure Side Impact Sensor Impact Sensor: Locations Driver Pressure Side Impact Sensor...
Page 455
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Restraint Systems > Impact Sensor > Component Information > Locations > Driver Pressure Side Impact Sensor > Page 566 Impact Sensor: Locations Front Impact Sensor...
Page 456
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Restraint Systems > Impact Sensor > Component Information > Locations > Driver Pressure Side Impact Sensor > Page 567 Impact Sensor: Locations Passenger Pressure Side Impact Sensor...
Page 457
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Restraint Systems > Impact Sensor > Component Information > Locations > Driver Pressure Side Impact Sensor > Page 568 Impact Sensor: Locations Rear Side Impact Sensor LH...
Page 458
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Restraint Systems > Impact Sensor > Component Information > Locations > Driver Pressure Side Impact Sensor > Page 569 Impact Sensor: Locations Rear Side Impact Sensor RH...
Page 459
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Restraint Systems > Seat Belt Buckle Switch > Component Information > Locations > Driver Seat Belt Buckle Switch Seat Belt Buckle Switch: Locations Driver Seat Belt Buckle Switch...
Page 460
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Restraint Systems > Seat Belt Buckle Switch > Component Information > Locations > Driver Seat Belt Buckle Switch > Page 574...
Page 461
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Restraint Systems > Seat Occupant Sensor > Component Information > Technical Service Bulletins > Customer Interest for Seat Occupant Sensor: > BOD072 > Oct > 10 >...
Page 462
SUBJECT: TROUBLESHOOTING DTC B1447/B1448/B1764/B1767 (AIRBAG WARNING LAMP ILLUMINATED) ON VEHICLES WITH ELECTRIC FIELD OCCUPANT CLASSIFICATION SENSOR This bulletin provides information relating to the occupant detection and classification system on certain Sorento (XM), Optima (MG) and Rio (JB) vehicles as shown below: The purpose of this TSB is to ensure a proper response to the appearance of certain DTC codes that identify a certain temporary condition.
Page 463
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Restraint Systems > Seat Occupant Sensor > Component Information > Technical Service Bulletins > Customer Interest for Seat Occupant Sensor: > BOD072 > Oct > 10...
Page 464
4 If DTC(s) do not re-code after this review the above information with the customer. Do not attempt to make a repair.
Page 465
5 If DTC(s) do re-code after this proceed with diagnosis according to Service Information on KGIS.
Page 466
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Restraint Systems > Seat Occupant Sensor > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Seat Occupant Sensor: >...
Page 467
DATE October 2010 SUBJECT: TROUBLESHOOTING DTC B1447/B1448/B1764/B1767 (AIRBAG WARNING LAMP ILLUMINATED) ON VEHICLES WITH ELECTRIC FIELD OCCUPANT CLASSIFICATION SENSOR This bulletin provides information relating to the occupant detection and classification system on certain Sorento (XM), Optima (MG) and Rio (JB) vehicles as shown below: The purpose of this TSB is to ensure a proper response to the appearance of certain DTC codes that identify a certain temporary condition.
Page 468
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Restraint Systems > Seat Occupant Sensor > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Seat Occupant Sensor: >...
Page 469
4 If DTC(s) do not re-code after this review the above information with the customer. Do not attempt to make a repair.
Page 470
5 If DTC(s) do re-code after this proceed with diagnosis according to Service Information on KGIS.
Page 471
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Starting and Charging > Battery Current Sensor > Component Information > Locations Battery Current Sensor: Locations...
Page 472
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Starting and Charging > Battery Temperature Sensor > Component Information > Locations Battery Temperature Sensor: Locations...
Page 473
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Starting and Charging > Ignition Switch > Component Information > Locations Ignition Switch: Locations...
Page 474
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Starting and Charging > Start / Stop Switch > Component Information > Locations Start / Stop Switch: Locations...
Page 475
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Steering and Suspension > Sensors and Switches - Steering > Power Steering Pressure Switch > Component Information > Locations Power Steering Pressure Switch: Locations...
Page 476
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Steering and Suspension > Sensors and Switches - Steering > Steering Angle Sensor > Component Information > Locations Steering Angle Sensor: Locations...
Page 477
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Steering and Suspension > Sensors and Switches - Suspension > Steering Angle Sensor > Component Information > Locations Steering Angle Sensor: Locations...
Page 478
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Steering and Suspension > Sensors and Switches - Wheels and Tires > Tire Pressure Sensor > Component Information > Technical Service Bulletins > Tire Monitor...
Page 479
NOTE: DO NOT replace or diagnose components in a position based on the DTC information. Always locate the sensor ID on the vehicle with the hand-tool. A commen mistake is Code C1312 is set and the technical replaces that sensor thinking it was in the left Front, the wheel and tire may be located in the Right Rear.
Page 480
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Steering and Suspension > Sensors and Switches - Wheels and Tires > Tire Pressure Sensor > Component Information > Technical Service Bulletins > Tire Monitor...
Page 482
^ If the Lamp shown above is ON: Check tire pressure and check for causes of low pressure. ^ If the Lamp shown above is ON: ^ Verify wheel sensor ID's in the ECU module corresponds to all 4 sensors on the vehicle - if not, reprogram the sensors on the vehicle into the ECU module.
Page 483
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Steering and Suspension > Sensors and Switches - Wheels and Tires > Tire Pressure Sensor > Component Information > Technical Service Bulletins > Tire Monitor System - Diagnosing Low Line TPMS >...
Page 484
LOW LINE: Wheel sensor to ECU communication takes place every 3 minutes, 20 seconds for TRW systems and every 3 minutes for Lear systems unless rapid tire deflation is occuring. Be sure to wait this amount of time for the values to populate on the Current Data Screen. ROAD TEST: To verify your repair drive the vehicle at or above 20 MPH for 20 minutes, if speed goes below 20 MPH during Auto-Learn (TRW only), the process is halted until speed is above threshold again.
Page 485
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Steering and Suspension > Sensors and Switches - Wheels and Tires > Tire Pressure Sensor > Component Information > Technical Service Bulletins > Tire Monitor System - Diagnosing Low Line TPMS >...
Page 486
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Steering and Suspension > Sensors and Switches - Wheels and Tires > Tire Pressure Sensor > Component Information > Technical Service Bulletins > Tire Monitor System - Diagnosing Low Line TPMS >...
Page 487
^ Vehicle Anti-Theft Locating Devices ^ Portable DVD Players ^ Incorrect Instrument Cluster - Part application not correct NOTE: Always use the correct part for the proper model year and production range, failure to do so may result in vehicles which are difficult to repair and can be subject to warranty chargeback. ^ Excessive aftermarket wiring tie-wrapped and coiled on or near TPMS module.
Page 488
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Transmission Mode Switch, A/T > Component Information > Locations Transmission Mode Switch: Locations...
Page 489
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Transmission Mode Switch, A/T > Component Information > Locations > Page 629...
Page 491
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Transmission Position Switch/Sensor, A/T > Component Information > Locations Transmission Position Switch/Sensor: Locations...
Page 492
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - Transfer Case > Four Wheel Drive Selector Switch > Component Information > Locations...
Page 493
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Windows and Glass > Power Window Switch > Component Information > Locations > Power Window Main Switch Power Window Switch: Locations Power Window Main Switch...
Page 494
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Windows and Glass > Power Window Switch > Component Information > Locations > Power Window Main Switch > Page 642 Power Window Switch: Locations Passenger Power Window Switch...
Page 495
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Windows and Glass > Power Window Switch > Component Information > Locations > Power Window Main Switch > Page 643 Power Window Switch: Locations Rear Power Window Switch...
Page 496
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Wiper and Washer Systems > Washer Fluid Level Switch > Component Information > Locations Washer Fluid Level Switch: Locations...
Page 497
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Wiper and Washer Systems > Windshield Washer Switch > Component Information > Locations Windshield Washer Switch: Locations...
Page 498
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Wiper and Washer Systems > Wiper Switch > Component Information > Locations > Multifunction Switch (Wiper) Wiper Switch: Locations Multifunction Switch (Wiper)
Page 499
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Sensors and Switches > Sensors and Switches - Wiper and Washer Systems > Wiper Switch > Component Information > Locations > Multifunction Switch (Wiper) > Page 655 Wiper Switch: Locations Rear Wiper Switch...
Page 500
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Alignment > System Information > Technical Service Bulletins > Steering/Suspension - Alignment Specs/Pull Diagnostics...
Page 501
Alignment: Technical Service Bulletins Steering/Suspension - Alignment Specs/Pull Diagnostics GROUP Chassis NUMBER 032 MODEL ALL DATE March 2011 SUBJECT: DRIFT / PULL DIAGNOSIS AND BEST PRACTICES TIPS This bulletin provides 2011 model year alignment specifications as well as diagnosis and best practices tips.
Page 502
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Alignment > System Information > Technical Service Bulletins > Steering/Suspension - Alignment Specs/Pull Diagnostics > Page 661...
Page 503
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Alignment > System Information > Technical Service Bulletins > Steering/Suspension - Alignment Specs/Pull Diagnostics > Page 662...
Page 504
Alignment Specifications: CAMBER: Camber is the inclination of the centerline of the wheel from the vertical as viewed from the front of the vehicle. The camber angle will affect the wear on the inner or outer edge of the tire. Positive camber is the outward tilt of the top of the tire.
Page 505
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Alignment > System Information > Technical Service Bulletins > Steering/Suspension - Alignment Specs/Pull Diagnostics > Page 663...
Page 506
camber. CASTER: Caster is the angle between an imaginary line drawn through the upper and lower steering pivots and a line perpendicular to the road surface (viewed from side of vehicle). If the top of the line tilts rearward, the vehicle is said to have "POSITIVE" caster. If the top of the line tilts forward, the vehicle is said to have "NEGATIVE"...
Page 507
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Alignment > System Information > Technical Service Bulletins > Steering/Suspension - Alignment Specs/Pull Diagnostics > Page 664 a. Camber - A vehicle will drift or pull towards the side with more positive front camber. Camber difference between the front tires greater than 0.5...
Page 508
a. Ply steer - Ply steer is an inherent characteristic in a tire which results in a lateral force as the tire rolls. Rotating the tires from side to side may aid in cancelling out the effects of ply steer and can aid in diagnosing a ply steer concern. b.
Page 509
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Alignment > System Information > Technical Service Bulletins > Steering/Suspension - Alignment Specs/Pull Diagnostics > Page 665 1. Before test driving, verify that all tires are OE, correctly installed (directional tires) and set to the correct inflation pressure.
Page 510
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Alignment > System Information > Technical Service Bulletins > Steering/Suspension - Alignment Specs/Pull Diagnostics > Page 666 4. Note the direction towards which the vehicle has a tendency to drift or pull. If the vehicle tends to...
Page 511
lane. If the vehicle tends to go right, place the vehicle on the left side of lane, as shown.
Page 512
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Alignment > System Information > Technical Service Bulletins > Steering/Suspension - Alignment Specs/Pull Diagnostics > Page 667...
Page 513
5. Take two time measurements. First, time how long it takes for the vehicle to move from one edge to the other edge (case 1), as shown. Second, time how long it takes for the vehicle to move across one complete lane (case 2), as shown. Use the conditions in the table below to confirm drifting or pulling condition.
Page 514
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Alignment > System Information > Technical Service Bulletins > Steering/Suspension - Alignment Specs/Pull Diagnostics > Page 668...
Page 515
Rolling Compensation - The rolling compensation procedure is critical to ensuring an accurate alignment. When performing the rolling compensation, be sure to do the following: 1. Set tire pressure to factory specification. 2. Ensure the lift is level so vehicle's suspension and steering are in a neutral position. 3.
Page 516
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Alignment > System Information > Technical Service Bulletins > Steering/Suspension - Alignment Specs/Pull Diagnostics > Page 669...
Page 517
Slip Plates - The slip plates of a Hunter alignment rack are designed to move smoothly and freely to provide accurate measurements. Before pulling a vehicle onto the rack, check that they move freely and do not bind. Periodically clean the area underneath the slip plates by blowing compressed air through to remove any debris.
Page 518
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Alignment > System Information > Technical Service Bulletins > Steering/Suspension - Alignment Specs/Pull Diagnostics > Page 670 3. After balancing, press the tire tag button to assign a number to that assembly. Label the assembly accordingly with a tag or chalk mark.
Page 519
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Alignment > System Information > Technical Service Bulletins > Steering/Suspension - Alignment Specs/Pull Diagnostics > Page 671...
Page 520
For all vehicle drift or pull complaints and/or alignment warranty claims, the alignment print out showing before and after measurements must be attached to the repair order.
Page 521
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Tune-up and Engine Performance Checks > System Information > Service Precautions...
Page 522
Tune-up and Engine Performance Checks: Service Precautions TUNE-UP SERVICE PRECAUTIONS - Tag or mark vacuum hoses before disconnecting them. After completing a job, double check that the vacuum hoses are properly connected. - To disconnect vacuum hoses, pull on the end, not the middle of the hose. - To pull apart electrical connectors, pull on the connector itself, not the wires.
Page 523
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Tune-up and Engine Performance Checks > System Information > Service Precautions > Page 675 - Before servicing the vehicle: - Protect fenders, upholstery and carpeting with appropriate covers.
Page 524
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Filters > System Information > Service Precautions...
Filters: Service Precautions SAFETY PRECAUTIONS WARNING: Prolonged and repeated contact with used engine oil may cause skin cancer. Avoid prolonged and repeated contact with oils, particularly used engine oils. - Wear protective clothing, including impervious gloves where practicable. - Do not put oily rags in pockets. - Avoid contaminating clothes, particularly underpants, with oil.
Page 526
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Hoses > System Information > Service Precautions...
Hoses: Service Precautions SERVICE PRECAUTIONS To prevent vehicle damage, always observe the following precautions: - After servicing a hose, check for leaks before and after test driving the vehicle. - Always use the correct size hose. Do not use standard sized hose in place of metric hose or vice versa.
Page 528
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fluids > Brake Fluid > Component Information > Technical Service Bulletins > Engine/A/T - Flushing Systems Not Recommended Brake Fluid: Technical Service Bulletins Engine/A/T - Flushing Systems Not Recommended...
Page 529
^ Kia vehicles require special lubricants, unless each machine is truly dedicated to each specific lubricant they should not be used for regular service intervals. * Kia does recommend flushing the oil cooler during A/T replacement, refer to the appropriate...
Page 530
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fluids > Brake Fluid > Component Information > Technical Service Bulletins > Engine/A/T - Flushing Systems Not Recommended > Page 687 Brake Fluid: Technical Service Bulletins Brakes - Fluid Changing/Adding Precautions...
Page 531
The information in this bulletin applies to all Kia models. NOTICE IMPORTANT: Make sure to completely remove any foreign substances from the brake fluid reservoir and around the cap area before removing the reservoir cap.
Page 532
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fluids > Brake Fluid > Component Information > Technical Service Bulletins > Engine/A/T - Flushing Systems Not Recommended > Page 688...
Page 533
2. If brake fluid reservoir cap is located under cowl top cover: a. First thoroughly wipe foreign substances off the lower surface of the cowl top cover as shown in the photo. b. Then wipe off the brake fluid reservoir. c.
Page 534
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fluids > Brake Fluid > Component Information > Technical Service Bulletins > Engine/A/T - Flushing Systems Not Recommended > Page 689 3. If the brake fluid reservoir is equipped with a strainer, add or change brake fluid with the strainer inserted at all times.
Page 535
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fluids > Brake Fluid > Component Information > Technical Service Bulletins > Page 690...
Page 536
Brake Fluid: Specifications Brake Fluid Type ....................................... FMVSS116 DOT-3 or DOT-4...
Page 537
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fluids > Coolant > Component Information > Technical Service Bulletins > Engine/A/T - Flushing Systems Not Recommended Coolant: Technical Service Bulletins Engine/A/T - Flushing Systems Not Recommended...
Page 538
^ Kia vehicles require special lubricants, unless each machine is truly dedicated to each specific lubricant they should not be used for regular service intervals. * Kia does recommend flushing the oil cooler during A/T replacement, refer to the appropriate...
Page 539
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fluids > Coolant > Component Information > Specifications > Capacity Specifications...
Page 541
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fluids > Coolant > Component Information > Specifications > Capacity Specifications > Page 697...
Page 542
Coolant: Fluid Type Specifications Coolant Type Type ................................Ethylene glycol base for aluminium radiators.
Page 543
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fluids > Fluid - A/T > Component Information > Technical Service Bulletins > A/T - 6-Speed Automatic Transaxle Fluid Level Check Fluid - A/T: Technical Service Bulletins A/T - 6-Speed Automatic Transaxle Fluid Level Check...
Page 544
7. Remove the oil level plug. ATF level is correct if the ATF flows out in a thin steady stream. If no ATF flows out, go to step 8. 8. If ATF flow does not occur, add Kia Type-4 ATF via the oil level hole until ATF flows out in a thin steady stream.
Page 545
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fluids > Fluid - A/T > Component Information > Technical Service Bulletins > A/T - 6-Speed Automatic Transaxle Fluid Level Check > Page 702 Adding ATF: Use a suction gun or equivalent tool to add ATF. Suction guns are available from various tool suppliers.
Page 546
^ Frequent driving on hilly or mountain type roads. ^ Repeated short distance driving. ^ 50% or more driving in heavy city traffic during hot weather above 90°F (32°C). ^ Trailer towing, or commercial operation such as a delivery service or similar use. ^ Driving on rough, bumpy, unpaved, or snowy roads.
Page 547
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fluids > Fluid - A/T > Component Information > Technical Service Bulletins > A/T - 6-Speed Automatic Transaxle Fluid Level Check > Page 703 Fluid - A/T: Technical Service Bulletins A/T - Proper Checking of A/T Fluid Level...
Page 548
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fluids > Fluid - A/T > Component Information > Technical Service Bulletins > A/T - 6-Speed Automatic Transaxle Fluid Level Check > Page 704 Fluid - A/T: Technical Service Bulletins Engine/A/T - Flushing Systems Not Recommended...
Page 549
^ Kia vehicles require special lubricants, unless each machine is truly dedicated to each specific lubricant they should not be used for regular service intervals. * Kia does recommend flushing the oil cooler during A/T replacement, refer to the appropriate...
Page 550
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fluids > Fluid - A/T > Component Information > Specifications > Capacity Specifications...
Page 553
Fluid - A/T: Fluid Type Specifications Automatic Transaxle Fluid Type ... MICHANG ATF SP-IV, SK ATF SP-IV, NOCA ATF SP-IV, KIA genuine ATF SP-IV or other brands meeting the specification approved by KIA motors corp.
Page 554
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fluids > Fluid - Differential > Component Information > Specifications > Capacity Specifications...
Page 557
Fluid - Differential: Fluid Type Specifications Rear Differential Oil Type ........................... Hypoid Gear Oil API GL-5 (SHELL SPIRAX X or equivalent) Viscosity ........................................... SAE 75W/90...
Page 558
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fluids > Fluid - Transfer Case > Component Information > Specifications > Capacity Specifications...
Page 559
Fluid - Transfer Case: Capacity Specifications Transfer Case Oil Capacity ........................................... 0.74 qt (0.7L)
Page 560
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fluids > Fluid - Transfer Case > Component Information > Specifications > Capacity Specifications > Page 717...
Page 561
Fluid - Transfer Case: Fluid Type Specifications Rear Differential Oil Type ........................... Hypoid Gear Oil API GL-5 (SHELL SPIRAX X or equivalent) Viscosity ........................................... SAE 75W/90...
Page 562
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fluids > Engine Oil > Component Information > Technical Service Bulletins > Engine/A/T - Flushing Systems Not Recommended Engine Oil: Technical Service Bulletins Engine/A/T - Flushing Systems Not Recommended...
Page 563
^ Kia vehicles require special lubricants, unless each machine is truly dedicated to each specific lubricant they should not be used for regular service intervals. * Kia does recommend flushing the oil cooler during A/T replacement, refer to the appropriate...
Page 564
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fluids > Engine Oil > Component Information > Specifications > Capacity Specifications...
Page 566
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fluids > Engine Oil > Component Information > Specifications > Capacity Specifications > Page 724...
Page 567
Engine Oil: Fluid Type Specifications Engine Oil Type ..................................API Service SM, ILSAC GF-4 or above. Viscosity ..........................................SAE 5W-20...
Page 568
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fluids > Power Steering Fluid > Component Information > Technical Service Bulletins > Engine/A/T - Flushing Systems Not Recommended Power Steering Fluid: Technical Service Bulletins Engine/A/T - Flushing Systems Not...
Page 569
^ Kia vehicles require special lubricants, unless each machine is truly dedicated to each specific lubricant they should not be used for regular service intervals. * Kia does recommend flushing the oil cooler during A/T replacement, refer to the appropriate...
Page 570
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fluids > Power Steering Fluid > Component Information > Technical Service Bulletins > Page 729...
Page 571
Power Steering Fluid: Specifications Power Steering Fluid Type ............................................PSF-III...
Page 572
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fuses and Circuit Breakers > Fuse > Component Information > Technical Service Bulletins > Electrical - Cell Chargers Blow Fuse to Accessory Socket Fuse: Technical Service Bulletins Electrical - Cell Chargers Blow Fuse to Accessory Socket...
Page 573
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fuses and Circuit Breakers > Fuse > Component Information > Technical Service Bulletins > Electrical - Cell Chargers Blow Fuse to Accessory Socket > Page 735 Fuse: Technical Service Bulletins Electrical - New Fuse Design on All Vehicles...
Page 574
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fuses and Circuit Breakers > Fuse > Component Information > Technical Service Bulletins > Page 736...
Page 606
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fuses and Circuit Breakers > Fuse Block > Component Information > Technical Service Bulletins > Electrical - Battery Current Draw Improper Connections...
Page 607
Fuse Block: Technical Service Bulletins Electrical - Battery Current Draw Improper Connections Model Sorento[XM] Group Body Electrical System(92) Number KT2010030501 Date Friday, March 05, 2010 Area N.America Subject 2011 Sorento (XMa) Battery Current Draw Caused by Improper Connections at the IPM for HomeLine Mirror - Description 2011 Sorento (XMa) Battery Current Draw Caused by Improper Connections at the IPM for...
Page 608
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Fuses and Circuit Breakers > Relay Box > Component Information > Locations > ICM Relay Box Relay Box: Locations ICM Relay Box...
Page 626
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Service Reminder Indicators > Low Tire Pressure Indicator > Component Information > Technical Service Bulletins > Tire Monitoring System - Low Pressure Warning Lamp On Low Tire Pressure Indicator: Technical Service Bulletins Tire Monitoring System - Low Pressure...
Page 627
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Wheels and Tires > Relays and Modules - Wheels and Tires > Tire Pressure Module > Component Information > Locations Tire Pressure Module: Locations...
Page 628
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Wheels and Tires > Sensors and Switches - Wheels and Tires > Tire Pressure Sensor > Component Information > Technical Service Bulletins > Tire Monitor System - Diagnosing Low Line TPMS...
Page 629
NOTE: DO NOT replace or diagnose components in a position based on the DTC information. Always locate the sensor ID on the vehicle with the hand-tool. A commen mistake is Code C1312 is set and the technical replaces that sensor thinking it was in the left Front, the wheel and tire may be located in the Right Rear.
Page 630
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Wheels and Tires > Sensors and Switches - Wheels and Tires > Tire Pressure Sensor > Component Information > Technical Service Bulletins > Tire Monitor System - Diagnosing Low Line TPMS > Page...
Page 632
^ If the Lamp shown above is ON: Check tire pressure and check for causes of low pressure. ^ If the Lamp shown above is ON: ^ Verify wheel sensor ID's in the ECU module corresponds to all 4 sensors on the vehicle - if not, reprogram the sensors on the vehicle into the ECU module.
Page 633
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Wheels and Tires > Sensors and Switches - Wheels and Tires > Tire Pressure Sensor > Component Information > Technical Service Bulletins > Tire Monitor System - Diagnosing Low Line TPMS > Page TRW systems only.
Page 634
LOW LINE: Wheel sensor to ECU communication takes place every 3 minutes, 20 seconds for TRW systems and every 3 minutes for Lear systems unless rapid tire deflation is occuring. Be sure to wait this amount of time for the values to populate on the Current Data Screen. ROAD TEST: To verify your repair drive the vehicle at or above 20 MPH for 20 minutes, if speed goes below 20 MPH during Auto-Learn (TRW only), the process is halted until speed is above threshold again.
Page 635
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Wheels and Tires > Sensors and Switches - Wheels and Tires > Tire Pressure Sensor > Component Information > Technical Service Bulletins > Tire Monitor System - Diagnosing Low Line TPMS > Page The warning light shown above = indicates a problem with the Wheel sensors, TPMS module, radio frequency interfearence or related wiring.
Page 636
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Wheels and Tires > Sensors and Switches - Wheels and Tires > Tire Pressure Sensor > Component Information > Technical Service Bulletins > Tire Monitor System - Diagnosing Low Line TPMS > Page...
Page 637
^ Vehicle Anti-Theft Locating Devices ^ Portable DVD Players ^ Incorrect Instrument Cluster - Part application not correct NOTE: Always use the correct part for the proper model year and production range, failure to do so may result in vehicles which are difficult to repair and can be subject to warranty chargeback. ^ Excessive aftermarket wiring tie-wrapped and coiled on or near TPMS module.
Page 638
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Wheels and Tires > Tire Monitoring System > Low Tire Pressure Indicator > Component Information > Technical Service Bulletins > Tire Monitoring System - Low Pressure Warning Lamp On...
Page 639
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Wheels and Tires > Tire Monitoring System > Tire Pressure Module > Component Information > Locations Tire Pressure Module: Locations...
Page 640
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Wheels and Tires > Tire Monitoring System > Tire Pressure Sensor > Component Information > Technical Service Bulletins > Tire Monitor System - Diagnosing Low Line TPMS...
Page 641
NOTE: DO NOT replace or diagnose components in a position based on the DTC information. Always locate the sensor ID on the vehicle with the hand-tool. A commen mistake is Code C1312 is set and the technical replaces that sensor thinking it was in the left Front, the wheel and tire may be located in the Right Rear.
Page 642
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Wheels and Tires > Tire Monitoring System > Tire Pressure Sensor > Component Information > Technical Service Bulletins > Tire Monitor System - Diagnosing Low Line TPMS > Page 800...
Page 643
TPMS Wheel Sensor Worksheet ^ If the Lamp shown above is ON: Check tire pressure and check for causes of low pressure. ^ If the Lamp shown above is ON: ^ Verify wheel sensor ID's in the ECU module corresponds to all 4 sensors on the vehicle - if not, reprogram the sensors on the vehicle into the ECU module.
Page 644
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Wheels and Tires > Tire Monitoring System > Tire Pressure Sensor > Component Information > Technical Service Bulletins > Tire Monitor System - Diagnosing Low Line TPMS > Page 801 TRW systems only.
Page 645
LOW LINE: Wheel sensor to ECU communication takes place every 3 minutes, 20 seconds for TRW systems and every 3 minutes for Lear systems unless rapid tire deflation is occuring. Be sure to wait this amount of time for the values to populate on the Current Data Screen. ROAD TEST: To verify your repair drive the vehicle at or above 20 MPH for 20 minutes, if speed goes below 20 MPH during Auto-Learn (TRW only), the process is halted until speed is above threshold again.
Page 646
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Wheels and Tires > Tire Monitoring System > Tire Pressure Sensor > Component Information > Technical Service Bulletins > Tire Monitor System - Diagnosing Low Line TPMS > Page 802 The warning light shown above = indicates a problem with the Wheel sensors, TPMS module, radio frequency interfearence or related wiring.
Page 647
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Maintenance > Wheels and Tires > Tire Monitoring System > Tire Pressure Sensor > Component Information > Technical Service Bulletins > Tire Monitor System - Diagnosing Low Line TPMS > Page 803...
Page 648
^ Portable DVD Players ^ Incorrect Instrument Cluster - Part application not correct NOTE: Always use the correct part for the proper model year and production range, failure to do so may result in vehicles which are difficult to repair and can be subject to warranty chargeback. ^ Excessive aftermarket wiring tie-wrapped and coiled on or near TPMS module.
Page 649
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Engine > Actuators and Solenoids - Engine > Variable Valve Timing Actuator > Component Information > Locations Variable Valve Timing Actuator: Locations...
Page 650
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Engine > Camshaft, Lifters and Push Rods > Variable Valve Timing Actuator > Component Information > Locations Variable Valve Timing Actuator: Locations...
Page 651
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Engine > Engine Lubrication > Engine Oil > Component Information > Technical Service Bulletins > Engine/A/T - Flushing Systems Not Recommended Engine Oil: Technical Service Bulletins Engine/A/T - Flushing Systems Not Recommended...
Page 652
^ Kia vehicles require special lubricants, unless each machine is truly dedicated to each specific lubricant they should not be used for regular service intervals. * Kia does recommend flushing the oil cooler during A/T replacement, refer to the appropriate...
Page 653
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Engine > Engine Lubrication > Engine Oil > Component Information > Specifications > Capacity Specifications...
Page 655
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Engine > Engine Lubrication > Engine Oil > Component Information > Specifications > Capacity Specifications > Page 821...
Page 656
Engine Oil: Fluid Type Specifications Engine Oil Type ..................................API Service SM, ILSAC GF-4 or above. Viscosity ..........................................SAE 5W-20...
Page 657
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Engine > Engine Lubrication > Oil Pressure Sender > Component Information > Locations Oil Pressure Sender: Locations...
Page 658
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Engine > Engine Lubrication > Oil Pump, Engine > Component Information > Technical Service Bulletins > Engine - Oil Pump Replacement Guidelines Oil Pump: Technical Service Bulletins Engine - Oil Pump Replacement Guidelines...
Page 659
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Engine > Engine Lubrication > Oil Pump, Engine > Component Information > Technical Service Bulletins > Engine - Oil Pump Replacement Guidelines > Page 829...
Page 660
^ Rotate the oil pump by hand (rotor/sprocket) to confirm that it rotates freely without much resistance Replace oil pump if internal binding damage is encountered. ^ Visually inspect the condition of the front main oil seal in the oil pump (engines using a front case assembly oil pump) for wear damage or visual leaks Replace the front main oil seal if necessary to ensure a proper seal.
Page 661
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Engine > Engine Lubrication > Oil Pump, Engine > Component Information > Technical Service Bulletins > Engine - Oil Pump Replacement Guidelines > Page 830 ^ Visually inspect and clean the Oil Pickup Screen Assembly replace only if damaged.
Page 662
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Engine > Engine Lubrication > Oil Pump, Engine > Component Information > Technical Service Bulletins > Engine - Oil Pump Replacement Guidelines > Page 831 ^ (For engines using front case assembly oil pumps) inspect the connection between the front case assembly and the oil screen assembly.
Page 663
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Engine > Engine Lubrication > Oil Temperature Sensor/Switch, Engine > Component Information > Locations Oil Temperature Sensor/Switch: Locations...
Page 664
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Engine > Sensors and Switches - Engine > Oil Pressure Sender > Component Information > Locations Oil Pressure Sender: Locations...
Page 665
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Engine > Sensors and Switches - Engine > Oil Temperature Sensor/Switch, Engine > Component Information > Locations Oil Temperature Sensor/Switch: Locations...
Page 667
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Engine > Tune-up and Engine Performance Checks > System Information > Service Precautions...
Page 668
Tune-up and Engine Performance Checks: Service Precautions TUNE-UP SERVICE PRECAUTIONS - Tag or mark vacuum hoses before disconnecting them. After completing a job, double check that the vacuum hoses are properly connected. - To disconnect vacuum hoses, pull on the end, not the middle of the hose. - To pull apart electrical connectors, pull on the connector itself, not the wires.
Page 669
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Engine > Tune-up and Engine Performance Checks > System Information > Service Precautions > Page 850 - Before servicing the vehicle: - Protect fenders, upholstery and carpeting with appropriate covers.
Page 670
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Cooling System > Coolant > Component Information > Technical Service Bulletins > Engine/A/T - Flushing Systems Not Recommended Coolant: Technical Service Bulletins Engine/A/T - Flushing Systems Not Recommended...
Page 671
^ Kia vehicles require special lubricants, unless each machine is truly dedicated to each specific lubricant they should not be used for regular service intervals. * Kia does recommend flushing the oil cooler during A/T replacement, refer to the appropriate...
Page 672
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Cooling System > Coolant > Component Information > Specifications > Capacity Specifications...
Page 674
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Cooling System > Coolant > Component Information > Specifications > Capacity Specifications > Page 858...
Page 675
Coolant: Fluid Type Specifications Coolant Type Type ................................Ethylene glycol base for aluminium radiators.
Page 676
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Cooling System > Radiator Cooling Fan > Radiator Cooling Fan Motor > Component Information > Locations Radiator Cooling Fan Motor: Locations...
Page 677
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Cooling System > Radiator Cooling Fan > Radiator Cooling Fan Motor Relay > Component Information > Locations...
Page 678
Radiator Cooling Fan Motor Relay: Locations E/R Fuse And Relay Box View...
Page 679
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Cooling System > Radiator Cooling Fan > Radiator Cooling Fan Motor Relay > Component Information > Locations > Page 866...
Page 680
E/R Fuse And Relay Box Circuit Details...
Page 681
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Cooling System > Radiator Cooling Fan > Radiator Cooling Fan Motor Relay > Component Information > Locations > Page 867...
Page 682
E/R Fuse And Relay Box Circuit Diagram...
Page 683
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Cooling System > Radiator Cooling Fan > Radiator Cooling Fan Motor Relay > Component Information > Locations > Page 868...
Page 684
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Cooling System > Engine - Coolant Temperature Sensor/Switch > Component Information > Locations Engine - Coolant Temperature Sensor/Switch: Locations...
Page 685
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Cooling System > Lamps and Indicators - Cooling System > Temperature Gauge > Component Information > Technical Service Bulletins > IP/Electrical - Cluster Operation...
Page 686
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Cooling System > Relays and Modules - Cooling System > Radiator Cooling Fan Motor Relay > Component Information > Locations...
Page 687
Radiator Cooling Fan Motor Relay: Locations E/R Fuse And Relay Box View...
Page 688
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Cooling System > Relays and Modules - Cooling System > Radiator Cooling Fan Motor Relay > Component Information > Locations > Page 881...
Page 689
E/R Fuse And Relay Box Circuit Details...
Page 690
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Cooling System > Relays and Modules - Cooling System > Radiator Cooling Fan Motor Relay > Component Information > Locations > Page 882...
Page 691
E/R Fuse And Relay Box Circuit Diagram...
Page 692
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Cooling System > Relays and Modules - Cooling System > Radiator Cooling Fan Motor Relay > Component Information > Locations > Page 883...
Page 693
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Cooling System > Sensors and Switches - Cooling System > Engine - Coolant Temperature Sensor/Switch > Component Information > Locations Engine - Coolant Temperature Sensor/Switch: Locations...
Page 694
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Engine, Cooling and Exhaust > Cooling System > Temperature Gauge > Component Information > Technical Service Bulletins > IP/Electrical - Cluster Operation Temperature Gauge: Technical Service Bulletins IP/Electrical - Cluster Operation...
Page 695
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Body Control Module > Component Information > Locations > BCM...
Page 696
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Body Control Module > Component Information > Locations > BCM > Page 899...
Page 697
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins >...
Page 698
This bulletin provides the procedure to upgrade the Powertrain Control Module (PCM) of some 2011 Model Year Sorento (XM) vehicles equipped with 3.5L engine prior to December 7, 2010. Some vehicles may experience a Malfunction Indicator Lamp (MIL) illuminated with system-related DTC P0017 stored in the PCM.
Page 699
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins >...
Page 700
1. Connect the power supply cable to the GDS tool or to the diagnostic terminal with the GDS docked. *NOTICE If attempting to perform ECM upgrade with power supply cable disconnected from the GDS tool, be sure to check that the GDS tool is fully charged before ECM upgrade. If the GDS tool is not fully charged, failure to perform the ECM upgrade may occur.
Page 701
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins >...
Page 702
3. Connect the Main 16-pin DLC cable (GHDM - 241000) to the VCI.
Page 703
4. Connect the Main 16-pin DLC cable (GHDM - 241000) between the VCI and the OBD-II connector, located under the driver's side of the instrument panel. 5. With the ignition key ON, turn ON the VCI and GDS tool. Access the GDS vehicle identification number (VIN) screen and configure the vehicle using the VIN AUTO DETECT Function.
Page 704
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins >...
Page 705
*NOTICE VIN Inquiry data for this repair is provided for tracking purposes only. Kia retailers should reference SA075 when accessing the WebDCS system.
Page 706
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins >...
Page 707
related DTC P0111 stored in the PCM. - P0111 Intake Air Temperature Sensor 1 Circuit Range / Performance For confirmation that the latest reflash has been performed to a vehicle you are working on verify ROM ID using the tables in this TSB. For vehicles not in affected VIN list, but with a customer complaint, perform the following repair instructions outlined in this bulletin and submit a warranty claim per "customer complaint"...
Page 708
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins >...
Page 709
^ When the PCM upgrade is completed, turn the ignition "OFF" and wait 20 seconds before starting the engine.
Page 710
^ ONLY use approved PCM upgrade software designated for the correct model, year. ROM ID INFORMATION TABLES To verify the vehicle is affected, be sure to check the Calibration Identification of the vehicle's PCM ROM ID and reference the Information Table as necessary. 1.
Page 711
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins >...
Page 712
5. With the ignition key ON, turn ON the VCI and GDS tool. Access the GDS vehicle identification number (VIN) screen and configure the vehicle using the VIN AUTO DETECT Function.
Page 713
6. Once back at the GDS Main Screen, select ECU Upgrade from the bottom right-hand corner. Next select Auto Mode, and then Engine Perform the ECM/ECU upgrade in accordance with normal GDS tool ECM/ECU upgrade procedures. NOTICE Do NOT attempt to perform a Manual Mode upgrade unless Auto Mode fails. Always follow the instructions given on the GDS tool in either Auto or Manual mode.
Page 714
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins >...
Page 715
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 716
Engine Control Module: All Technical Service Bulletins Emissions - California Emissions Data Extraction...
Page 717
GROUP Engine NUMBER 090 MODEL 2011MY Sedona (VQ), Rio (JB) DATE February 2011 SUBJECT: DATA COLLECTION: EXTRACT CALIFORNIA EMISSIONS DATA FROM ECU (DC002) This bulletin provides information related to extracting "In use performance tracking" missions data from the engine control unit (ECU) in certain vehicles sold in California. The California Air Resource Board (GARB) requires this emissions data to be extracted from the ECUs of a number of customer owned 2011 model year vehicles with a minimum of 3000 accumulated miles without reprogramming or resetting.
Page 718
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 720
2. To start use the Global Diagnostic System (GDS). Begin by clicking on "ID Register". Click on "Auto VIN" or manually enter vehicle information on the next screen. *NOTICE GDS must be updated to version N-K-01-07-0010 or later to properly collect date. 3.
Page 721
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 723
5b. Write down the "Calibration ID" or "ROM ID" number for later form entry. Next go to the main screen by clicking on the "GDS" logo at the top left of the screen. 6. Then select "CARB OBD-II" under the "Diagnosis" tab.
Page 724
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 725
7. Click on "IN-USE Performance Tracking" found in the CARB OBD-II list at the bottom left of the screen. Then click the "Expand" button at the top right corner of "IN-USE Performance Tracking"...
Page 726
window. *NOTICE If all values indicate "Not Supported" or "0", check to make sure you have GDS software version N-K-01-07-0010 or later. If the software version is correct, and all values show "Not Supported" or "0", the vehicle will not qualify for this data collection, as it may have received a recent ECM Update or battery replacement/reset of the data values.
Page 727
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 728
9. Select "Scantool Area - Full" and click "Send to file". The GDS will set up a designation folder and file name to save the captured data. Please change the file name to include the model/engine,...
Page 729
the last 6 of the VIN and the date (mmddyyyy). Before saving, write down the file name and designation folder for further reference. Example 10. After saving the file, return to the GDS home page by clicking on "GDS" logo in the upper left hand corner.
Page 730
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 731
12. Enter all the information requested in the form including your name and email address.
Page 732
^ For System, enter "Engine". ^ For Subject, enter "Data Collection". ^ In the Description area, ^ Type "Group:" followed by the group number from the Vehicle Emission Control Information label in step 1. ^ Type "Calibration ID:" followed by the calibration ID obtained in step 5b. ^ Add current odometer mileage.
Page 733
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 734
14. Refer to the file name and destination from step 9.
Page 735
^ Navigate to: Local Disk (D:) / gvciData / Record / ^ Click on the folder for the vehicle ie., "Sportage (KM)". ^ Click on the folder containing the vehicle VIN. ^ Click on the file name. ^ Once the file name appears in the "File Name" box, click on the "Open" button. 15.
Page 736
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 737
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 738
SUBJECT: COMBINED TSB / SERVICE ACTION: MIL ON WITH DTC P0017 DTC LOGIC IMPROVEMENT (SA075) This bulletin provides the procedure to upgrade the Powertrain Control Module (PCM) of some 2011 Model Year Sorento (XM) vehicles equipped with 3.5L engine prior to December 7, 2010. Some vehicles may experience a Malfunction Indicator Lamp (MIL) illuminated with system-related DTC P0017 stored in the PCM.
Page 739
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 740
1. Connect the power supply cable to the GDS tool or to the diagnostic terminal with the GDS docked. *NOTICE If attempting to perform ECM upgrade with power supply cable disconnected from the GDS tool, be sure to check that the GDS tool is fully charged before ECM upgrade. If the GDS tool is not fully charged, failure to perform the ECM upgrade may occur.
Page 741
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 742
3. Connect the Main 16-pin DLC cable (GHDM - 241000) to the VCI.
Page 743
4. Connect the Main 16-pin DLC cable (GHDM - 241000) between the VCI and the OBD-II connector, located under the driver's side of the instrument panel. 5. With the ignition key ON, turn ON the VCI and GDS tool. Access the GDS vehicle identification number (VIN) screen and configure the vehicle using the VIN AUTO DETECT Function.
Page 744
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 745
*NOTICE VIN Inquiry data for this repair is provided for tracking purposes only. Kia retailers should reference SA075 when accessing the WebDCS system.
Page 746
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 747
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 748
To correct this condition, the PCM should be reprogrammed using the GDS download as described in this bulletin.
Page 750
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 751
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 754
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 755
2010. Some vehicles may experience a Malfunction Indicator Lamp (MIL) illuminated with system = related DTC P0111 stored in the PCM. - P0111 Intake Air Temperature Sensor 1 Circuit Range / Performance For confirmation that the latest reflash has been performed to a vehicle you are working on verify ROM ID using the tables in this TSB.
Page 756
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 757
^ When the PCM upgrade is completed, turn the ignition "OFF" and wait 20 seconds before starting the engine.
Page 758
^ ONLY use approved PCM upgrade software designated for the correct model, year. ROM ID INFORMATION TABLES To verify the vehicle is affected, be sure to check the Calibration Identification of the vehicle's PCM ROM ID and reference the Information Table as necessary. 1.
Page 759
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 760
5. With the ignition key ON, turn ON the VCI and GDS tool. Access the GDS vehicle identification number (VIN) screen and configure the vehicle using the VIN AUTO DETECT Function.
Page 761
6. Once back at the GDS Main Screen, select ECU Upgrade from the bottom right-hand corner. Next select Auto Mode, and then Engine Perform the ECM/ECU upgrade in accordance with normal GDS tool ECM/ECU upgrade procedures. NOTICE Do NOT attempt to perform a Manual Mode upgrade unless Auto Mode fails. Always follow the instructions given on the GDS tool in either Auto or Manual mode.
Page 762
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 763
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 764
Subject Sorento (XM) Transmission Adaptive Learning - Description Sorento (XM) Transmission Adaptive Learning This article gives information on setting the transaxle adaptive learning after a reflash or transaxle replacement has occurred. This can also be used for customer shift feel complaints. The Coolant temperature must be 161F (72C0 or higher and the Transaxle fluid temperature must be higher then 104F (40C) to begin the procedure.
Page 765
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Engine Control Module: >...
Page 767
3. A/C OFF. 4. Repeat this procedure with 4 second delay before shifting the lever into another gear (N -> D, D -> N). 5. Repeat this procedure at least six times. Final or complete adaptive learning will take several miles at different temperature ranges to adjust for the customer driving style however the base setting is necessary to compensate for excessive tolerances in the clutch pack set.
Page 768
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins >...
Page 769
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins >...
Page 770
To correct this condition, the PCM should be reprogrammed using the GDS download as described in this bulletin.
Page 772
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins >...
Page 773
1. Connect the power supply cable to the GDS tool 2. Connect the USB cable between the VCI and the GDS tool 3. Connect the Main 16-pin DLC cable (GHDM - 241000) to the VCI 4. Connect the Main 16-pin DLC cable (GHDM - 241000) to the OBD-II connector, located under the drivers side of the instrument panel.
Page 774
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins >...
Page 775
before attempting to start the engine. 8. Check for Diagnostic Trouble Codes using the GDS and erase any DTCs stored such as EPS ESC and TPMS Due to CAN BUS multiple DTCs may be set during reprogramming. 9. Start the engine to confirm proper operation of the vehicle. AFFECTED PRODUCTION RANGE: SERVICE ACTION WARRANTY CLAIM INFORMATION:...
Page 776
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 777
Engine Control Module: All Technical Service Bulletins Emissions - California Emissions Data Extraction...
Page 778
GROUP Engine NUMBER 090 MODEL 2011MY Sedona (VQ), Rio (JB) DATE February 2011 SUBJECT: DATA COLLECTION: EXTRACT CALIFORNIA EMISSIONS DATA FROM ECU (DC002) This bulletin provides information related to extracting "In use performance tracking" missions data from the engine control unit (ECU) in certain vehicles sold in California. The California Air Resource Board (GARB) requires this emissions data to be extracted from the ECUs of a number of customer owned 2011 model year vehicles with a minimum of 3000 accumulated miles without reprogramming or resetting.
Page 779
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 781
2. To start use the Global Diagnostic System (GDS). Begin by clicking on "ID Register". Click on "Auto VIN" or manually enter vehicle information on the next screen. *NOTICE GDS must be updated to version N-K-01-07-0010 or later to properly collect date. 3.
Page 782
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 784
5b. Write down the "Calibration ID" or "ROM ID" number for later form entry. Next go to the main screen by clicking on the "GDS" logo at the top left of the screen. 6. Then select "CARB OBD-II" under the "Diagnosis" tab.
Page 785
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 786
7. Click on "IN-USE Performance Tracking" found in the CARB OBD-II list at the bottom left of the screen. Then click the "Expand" button at the top right corner of "IN-USE Performance Tracking"...
Page 787
window. *NOTICE If all values indicate "Not Supported" or "0", check to make sure you have GDS software version N-K-01-07-0010 or later. If the software version is correct, and all values show "Not Supported" or "0", the vehicle will not qualify for this data collection, as it may have received a recent ECM Update or battery replacement/reset of the data values.
Page 788
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 789
9. Select "Scantool Area - Full" and click "Send to file". The GDS will set up a designation folder and file name to save the captured data. Please change the file name to include the model/engine,...
Page 790
the last 6 of the VIN and the date (mmddyyyy). Before saving, write down the file name and designation folder for further reference. Example 10. After saving the file, return to the GDS home page by clicking on "GDS" logo in the upper left hand corner.
Page 791
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 792
12. Enter all the information requested in the form including your name and email address.
Page 793
^ For System, enter "Engine". ^ For Subject, enter "Data Collection". ^ In the Description area, ^ Type "Group:" followed by the group number from the Vehicle Emission Control Information label in step 1. ^ Type "Calibration ID:" followed by the calibration ID obtained in step 5b. ^ Add current odometer mileage.
Page 794
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 795
14. Refer to the file name and destination from step 9.
Page 796
^ Navigate to: Local Disk (D:) / gvciData / Record / ^ Click on the folder for the vehicle ie., "Sportage (KM)". ^ Click on the folder containing the vehicle VIN. ^ Click on the file name. ^ Once the file name appears in the "File Name" box, click on the "Open" button. 15.
Page 797
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 798
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 799
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 800
To correct this condition, the PCM should be reprogrammed using the GDS download as described in this bulletin.
Page 802
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 803
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 806
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 807
Subject Sorento (XM) Transmission Adaptive Learning - Description Sorento (XM) Transmission Adaptive Learning This article gives information on setting the transaxle adaptive learning after a reflash or transaxle replacement has occurred. This can also be used for customer shift feel complaints. The Coolant temperature must be 161F (72C0 or higher and the Transaxle fluid temperature must be higher then 104F (40C) to begin the procedure.
Page 808
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 810
3. A/C OFF. 4. Repeat this procedure with 4 second delay before shifting the lever into another gear (N -> D, D -> N). 5. Repeat this procedure at least six times. Final or complete adaptive learning will take several miles at different temperature ranges to adjust for the customer driving style however the base setting is necessary to compensate for excessive tolerances in the clutch pack set.
Page 811
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 813
2. To start use the Global Diagnostic System (GDS). Begin by clicking on "ID Register". Click on "Auto VIN" or manually enter vehicle information on the next screen. *NOTICE GDS must be updated to version N-K-01-07-0010 or later to properly collect date. 3.
Page 814
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 816
5b. Write down the "Calibration ID" or "ROM ID" number for later form entry. Next go to the main screen by clicking on the "GDS" logo at the top left of the screen. 6. Then select "CARB OBD-II" under the "Diagnosis" tab.
Page 817
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 818
7. Click on "IN-USE Performance Tracking" found in the CARB OBD-II list at the bottom left of the screen. Then click the "Expand" button at the top right corner of "IN-USE Performance Tracking"...
Page 819
window. *NOTICE If all values indicate "Not Supported" or "0", check to make sure you have GDS software version N-K-01-07-0010 or later. If the software version is correct, and all values show "Not Supported" or "0", the vehicle will not qualify for this data collection, as it may have received a recent ECM Update or battery replacement/reset of the data values.
Page 820
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 821
9. Select "Scantool Area - Full" and click "Send to file". The GDS will set up a designation folder and file name to save the captured data. Please change the file name to include the model/engine,...
Page 822
the last 6 of the VIN and the date (mmddyyyy). Before saving, write down the file name and designation folder for further reference. Example 10. After saving the file, return to the GDS home page by clicking on "GDS" logo in the upper left hand corner.
Page 823
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 824
12. Enter all the information requested in the form including your name and email address.
Page 825
^ For System, enter "Engine". ^ For Subject, enter "Data Collection". ^ In the Description area, ^ Type "Group:" followed by the group number from the Vehicle Emission Control Information label in step 1. ^ Type "Calibration ID:" followed by the calibration ID obtained in step 5b. ^ Add current odometer mileage.
Page 826
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 827
14. Refer to the file name and destination from step 9.
Page 828
^ Navigate to: Local Disk (D:) / gvciData / Record / ^ Click on the folder for the vehicle ie., "Sportage (KM)". ^ Click on the folder containing the vehicle VIN. ^ Click on the file name. ^ Once the file name appears in the "File Name" box, click on the "Open" button. 15.
Page 829
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 830
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 831
SUBJECT: COMBINED TSB / SERVICE ACTION: MIL ON WITH DTC P0017 DTC LOGIC IMPROVEMENT (SA075) This bulletin provides the procedure to upgrade the Powertrain Control Module (PCM) of some 2011 Model Year Sorento (XM) vehicles equipped with 3.5L engine prior to December 7, 2010. Some vehicles may experience a Malfunction Indicator Lamp (MIL) illuminated with system-related DTC P0017 stored in the PCM.
Page 832
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 833
1. Connect the power supply cable to the GDS tool or to the diagnostic terminal with the GDS docked. *NOTICE If attempting to perform ECM upgrade with power supply cable disconnected from the GDS tool, be sure to check that the GDS tool is fully charged before ECM upgrade. If the GDS tool is not fully charged, failure to perform the ECM upgrade may occur.
Page 834
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 835
3. Connect the Main 16-pin DLC cable (GHDM - 241000) to the VCI.
Page 836
4. Connect the Main 16-pin DLC cable (GHDM - 241000) between the VCI and the OBD-II connector, located under the driver's side of the instrument panel. 5. With the ignition key ON, turn ON the VCI and GDS tool. Access the GDS vehicle identification number (VIN) screen and configure the vehicle using the VIN AUTO DETECT Function.
Page 837
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 838
*NOTICE VIN Inquiry data for this repair is provided for tracking purposes only. Kia retailers should reference SA075 when accessing the WebDCS system.
Page 839
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 840
2010. Some vehicles may experience a Malfunction Indicator Lamp (MIL) illuminated with system = related DTC P0111 stored in the PCM. - P0111 Intake Air Temperature Sensor 1 Circuit Range / Performance For confirmation that the latest reflash has been performed to a vehicle you are working on verify ROM ID using the tables in this TSB.
Page 841
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 842
^ When the PCM upgrade is completed, turn the ignition "OFF" and wait 20 seconds before starting the engine.
Page 843
^ ONLY use approved PCM upgrade software designated for the correct model, year. ROM ID INFORMATION TABLES To verify the vehicle is affected, be sure to check the Calibration Identification of the vehicle's PCM ROM ID and reference the Information Table as necessary. 1.
Page 844
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 845
5. With the ignition key ON, turn ON the VCI and GDS tool. Access the GDS vehicle identification number (VIN) screen and configure the vehicle using the VIN AUTO DETECT Function.
Page 846
6. Once back at the GDS Main Screen, select ECU Upgrade from the bottom right-hand corner. Next select Auto Mode, and then Engine Perform the ECM/ECU upgrade in accordance with normal GDS tool ECM/ECU upgrade procedures. NOTICE Do NOT attempt to perform a Manual Mode upgrade unless Auto Mode fails. Always follow the instructions given on the GDS tool in either Auto or Manual mode.
Page 847
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 848
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > All Other Service Bulletins for Engine Control Module: >...
Page 850
3. A/C OFF. 4. Repeat this procedure with 4 second delay before shifting the lever into another gear (N -> D, D -> N). 5. Repeat this procedure at least six times. Final or complete adaptive learning will take several miles at different temperature ranges to adjust for the customer driving style however the base setting is necessary to compensate for excessive tolerances in the clutch pack set.
Page 851
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > Page...
Page 852
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Main Relay (Computer/Fuel System) > Component Information > Locations...
Page 853
Main Relay (Computer/Fuel System): Locations E/R Fuse And Relay Box View...
Page 854
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Main Relay (Computer/Fuel System) > Component Information > Locations > Page...
Page 855
E/R Fuse And Relay Box Circuit Details...
Page 856
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Main Relay (Computer/Fuel System) > Component Information > Locations > Page...
Page 870
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Accelerator Pedal Position Sensor > Component Information > Technical Service Bulletins > Engine Controls - Engine Management DTCs P2135 and P2138...
Page 871
Accelerator Pedal Position Sensor: Technical Service Bulletins Engine Controls - Engine Management DTCs P2135 and P2138...
Page 872
Model All Model Group Fuel System(14) Number KT2008090302 Date Wednesday, September 03, 2008 Area N.America Subject Engine Management DTCs - P2135 and P2138 - Description KMA has found in some cases that the Accelerator Position Sensor (APS) as part of the accelerator pedal assembly is being replaced unneccessarily for DTC P2135.
Page 873
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Accelerator Pedal Position Sensor > Component Information > Technical Service Bulletins > Page 1042...
Page 874
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Barometric Pressure Switch > Component Information > Locations Barometric Pressure Switch: Locations...
Page 875
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Battery Current Sensor > Component Information > Locations Battery Current Sensor: Locations...
Page 876
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Battery Temperature Sensor > Component Information > Locations Battery Temperature Sensor: Locations...
Page 877
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Camshaft Position Sensor > Component Information > Locations > Camshaft...
Page 878
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Camshaft Position Sensor > Component Information > Locations > Camshaft Position Sensor #1 >...
Page 879
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Camshaft Position Sensor > Component Information > Locations > Camshaft Position Sensor #1 >...
Page 880
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Crankshaft Position Sensor > Component Information > Technical Service Bulletins > Engine Controls - DTC P0300/No Driveability Complaints...
Page 881
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Crankshaft Position Sensor > Component Information > Technical Service Bulletins > Page 1062...
Page 882
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > EGR Valve Position Sensor > Component Information > Locations EGR Valve Position Sensor: Locations...
Page 883
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Fuel Tank Pressure Sensor > Component Information > Locations Fuel Tank Pressure Sensor: Locations...
Page 884
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Knock Sensor > Component Information > Locations > Knock Sensor # 1...
Page 885
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Knock Sensor > Component Information > Locations > Knock Sensor # 1 >...
Page 886
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Manifold Pressure/Vacuum Sensor > Component Information > Locations Manifold Pressure/Vacuum Sensor: Locations...
Page 887
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Oxygen Sensor > Component Information > Locations > Oxygen Sensor #2...
Page 888
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Oxygen Sensor > Component Information > Locations > Oxygen Sensor #2 (B2/S1) >...
Page 889
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Oxygen Sensor > Component Information > Locations > Oxygen Sensor #2 (B2/S1) >...
Page 890
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Power Steering Pressure Switch > Component Information > Locations Power Steering Pressure Switch: Locations...
Page 891
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Throttle Position Sensor > Component Information > Locations Throttle Position Sensor: Locations...
Page 892
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Transmission Position Switch/Sensor, A/T > Component Information > Locations Transmission Position Switch/Sensor: Locations...
Page 893
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram...
Page 894
Vehicle Speed Sensor: Diagram Information and Instructions...
Page 896
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram...
Page 897
1. Pages by system / Name of Schematic diagram...
Page 898
- Each page is consisted of circuits by system. This schematic diagram includes the path of electricity flow, connection condition for each switch, and the function of other relevant circuits at once. It is applicable to real service work. - It is very important to understand relevant circuits exactly before troubleshooting diagnosis. - Circuits by system depends upon part number and are indicated on schematic diagram index.
Page 899
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram...
Page 900
- It shows the front of the connector on the harness side when not to the harness connector. The terminal number on each connector can be obtained by following the pattern used in (5) connector...
Page 901
view and numbering order. Unused terminals are marked with an asterisk (*). 3. Connector configurations (connection between harnesses) - When connecting the harness with connector between harnesses, it shows female and male connectors and indicates them on the connector configurations group. EM02 4.
Page 902
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram...
Electrical wiring connectors are classified according to the wiring parts in the Harness Layouts. 8. CONNECTOR IDENTIFICATION A Connector identification symbol consists of a wiring harness location classification symbol corresponding to a wiring harness location and number corresponding to the connector. These connector locations can be found in the HARNESS LAYOUTS.
Page 905
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram Information and Instructions >...
Page 906
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram...
Page 908
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram Information and Instructions >...
Page 909
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram Information and Instructions >...
Page 910
TROUBLESHOOTING EQUIPMENT VOLTMETER AND TEST LAMP Use a test lamp or a voltmeter on circuits without solid-state units and use a test lamp to check for voltage. A test lamp is made up of a 12-volt light bulb with a pair of leads attached. After grounding one lead, touch the other lead to various points along the circuit where voltage should be present.
Page 911
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram Information and Instructions >...
Page 912
A jumper wire is made up of an in-line fuse holder connected to a set of test leads. This tool is available with small clamp connectors providing adaption to most connectors without damage. CAUTION: Do not use a fuse with a higher rating than the specified fuse that protects the circuit being tested.
Page 913
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram...
A. Disconnect the battery negative terminal. B. Connect one lead of a self-powered test lamp or ohmmeter to one end of the part of the circuit you wish to test. If you are using an ohmmeter, hold the leads together and adjust the ohmmeter to read zero ohms. C.
Page 916
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram...
Page 917
B. Connect the short finder across the fuse terminals. C. Close all switches in series in the circuit that is being testing. D. Turn on the short circuit locator. It sends pulses of current to the short. This...
creates a pulsing magnetic field around the wiring between the fuse box and the short. E. Beginning at the fuse box, slowly move the short finder along the circuit wiring. The meter will show current pulses through sheet metal and body trim.
Page 919
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram...
Page 922
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram...
Page 923
Vehicle Speed System (2) Connector Pin Outs...
Page 924
Diagrams: Other diagrams referred to by SD number (i.e. SD130-4, etc.) within these diagrams can be found at Diagrams by Number. See: Diagrams/Electrical Diagrams/Diagrams By Number Locations: Location photographs (references to PHOTOS) referred to within these diagrams can be found via the photo number at the vehicle level under Locations by Photo Number. See: Locations/Component Locations...
Page 925
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Emission Control Systems > EGR Valve Position Sensor > Component Information > Locations EGR Valve Position Sensor: Locations...
Page 926
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Fuel Delivery and Air Induction > Accelerator Pedal Position Sensor > Component Information > Technical...
Page 927
Accelerator Pedal Position Sensor: Technical Service Bulletins Engine Controls - Engine Management DTCs P2135 and P2138...
Page 928
Model All Model Group Fuel System(14) Number KT2008090302 Date Wednesday, September 03, 2008 Area N.America Subject Engine Management DTCs - P2135 and P2138 - Description KMA has found in some cases that the Accelerator Position Sensor (APS) as part of the accelerator pedal assembly is being replaced unneccessarily for DTC P2135.
Page 929
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Fuel Delivery and Air Induction > Accelerator Pedal Position Sensor > Component Information > Technical Service Bulletins >...
Page 930
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Fuel Delivery and Air Induction > Throttle Position Sensor > Component Information > Locations Throttle Position Sensor: Locations...
Page 931
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Ignition System > Camshaft Position Sensor > Component Information > Locations > Camshaft Position Sensor...
Page 932
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Ignition System > Camshaft Position Sensor > Component Information > Locations > Camshaft Position Sensor #1 >...
Page 933
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Ignition System > Camshaft Position Sensor > Component Information > Locations > Camshaft Position Sensor #1 >...
Page 934
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Ignition System > Crankshaft Position Sensor > Component Information > Technical Service Bulletins > Engine...
Page 935
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Ignition System > Crankshaft Position Sensor > Component Information > Technical Service Bulletins > Page...
Page 936
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Ignition System > Ignition Switch > Component Information > Locations Ignition Switch: Locations...
Page 937
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Ignition System > Knock Sensor > Component Information > Locations > Knock Sensor # 1...
Page 938
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Ignition System > Knock Sensor > Component Information > Locations > Knock Sensor # 1 > Page 1140...
Page 939
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Tune-up and Engine Performance Checks > System Information > Service Precautions...
Page 940
Tune-up and Engine Performance Checks: Service Precautions TUNE-UP SERVICE PRECAUTIONS - Tag or mark vacuum hoses before disconnecting them. After completing a job, double check that the vacuum hoses are properly connected. - To disconnect vacuum hoses, pull on the end, not the middle of the hose. - To pull apart electrical connectors, pull on the connector itself, not the wires.
Page 941
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Tune-up and Engine Performance Checks > System Information > Service Precautions > Page 1144 - Before servicing the vehicle: - Protect fenders, upholstery and carpeting with appropriate covers.
Page 942
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Accelerator Pedal Position Sensor > Component Information > Technical Service Bulletins > Engine Controls - Engine Management DTCs P2135 and P2138...
Page 943
Accelerator Pedal Position Sensor: Technical Service Bulletins Engine Controls - Engine Management DTCs P2135 and P2138 Model All Model Group Fuel System(14) Number KT2008090302 Date Wednesday, September 03, 2008 Area N.America Subject Engine Management DTCs - P2135 and P2138 - Description KMA has found in some cases that the Accelerator Position Sensor (APS) as part of the accelerator pedal assembly is being replaced unneccessarily for DTC P2135.
Page 944
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Accelerator Pedal Position Sensor > Component Information > Technical Service Bulletins > Page 1150 Accelerator Pedal Position Sensor: Locations...
Page 945
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Barometric Pressure Switch > Component Information > Locations Barometric Pressure Switch: Locations...
Page 946
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Battery Current Sensor > Component Information > Locations Battery Current Sensor: Locations...
Page 947
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Battery Temperature Sensor > Component Information > Locations Battery Temperature Sensor: Locations...
Page 948
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Body Control Module > Component Information > Locations > BCM Body Control Module: Locations BCM...
Page 949
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Body Control Module > Component Information > Locations > BCM > Page 1164 Body Control Module: Locations IPM...
Page 950
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Camshaft Position Sensor > Component Information > Locations > Camshaft Position Sensor #1 Camshaft Position Sensor: Locations Camshaft Position Sensor #1...
Page 951
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Camshaft Position Sensor > Component Information > Locations > Camshaft Position Sensor #1 > Page 1169 Camshaft Position Sensor: Locations Camshaft Position Sensor #2 (Exhaust)
Page 952
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Camshaft Position Sensor > Component Information > Locations > Camshaft Position Sensor #1 > Page 1170 Camshaft Position Sensor: Locations Camshaft Position Sensor #2 (Intake)
Page 953
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Crankshaft Position Sensor > Component Information > Technical Service Bulletins > Engine Controls - DTC P0300/No Driveability Complaints Crankshaft Position Sensor: Technical Service Bulletins Engine Controls - DTC P0300/No...
Page 954
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Crankshaft Position Sensor > Component Information > Technical Service Bulletins > Page 1175 Crankshaft Position Sensor: Locations...
Page 955
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Data Link Connector > Component Information > Locations Data Link Connector: Locations...
Page 956
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Data Link Connector > Component Information > Diagrams > Diagram Information and Instructions...
Page 957
Data Link Connector: Diagram Information and Instructions Schematic Diagrams INTRODUCTION...
Page 958
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Data Link Connector > Component Information > Diagrams > Diagram Information and Instructions > Page 1181...
Page 959
1. Pages by system / Name of Schematic diagram - Each page is consisted of circuits by system. This schematic diagram includes the path of electricity flow, connection condition for each switch, and the function of other relevant circuits at once.
Page 960
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Data Link Connector > Component Information > Diagrams > Diagram Information and Instructions > Page 1182...
Page 961
- It shows the front of the connector on the harness side when not to the harness connector. The terminal number on each connector can be obtained by following the pattern used in (5) connector view and numbering order. Unused terminals are marked with an asterisk (*). 3.
Page 962
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Data Link Connector > Component Information > Diagrams > Diagram Information and Instructions > Page 1183...
7. HARNESS CLASSIFICATION Electrical wiring connectors are classified according to the wiring parts in the Harness Layouts. 8. CONNECTOR IDENTIFICATION A Connector identification symbol consists of a wiring harness location classification symbol corresponding to a wiring harness location and number corresponding to the connector. These connector locations can be found in the HARNESS LAYOUTS.
Page 964
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Data Link Connector > Component Information > Diagrams > Diagram Information and Instructions > Page 1184 HARNESS LAYOUTS Harness layouts show the routing of the major wiring harnesses, the in-line connectors and the splices between the major harnesses.
Page 965
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Data Link Connector > Component Information > Diagrams > Diagram Information and Instructions > Page 1185...
Page 967
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Data Link Connector > Component Information > Diagrams > Diagram Information and Instructions > Page 1186 Symbols Part 2...
Page 968
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Data Link Connector > Component Information > Diagrams > Diagram Information and Instructions > Page 1187 Data Link Connector: Diagnostic Aids...
Page 969
TROUBLESHOOTING EQUIPMENT VOLTMETER AND TEST LAMP Use a test lamp or a voltmeter on circuits without solid-state units and use a test lamp to check for voltage. A test lamp is made up of a 12-volt light bulb with a pair of leads attached. After grounding one lead, touch the other lead to various points along the circuit where voltage should be present.
Page 970
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Data Link Connector > Component Information > Diagrams > Diagram Information and Instructions > Page 1188 Circuits which include any solid-state devices should be tested only with a 10-megaohm or higher impedance digital multimeter.
Page 971
A jumper wire is made up of an in-line fuse holder connected to a set of test leads. This tool is available with small clamp connectors providing adaption to most connectors without damage. CAUTION: Do not use a fuse with a higher rating than the specified fuse that protects the circuit being tested.
Page 972
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Data Link Connector > Component Information > Diagrams > Diagram Information and Instructions > Page 1189...
2. TESTING FOR CONTINUITY A. Disconnect the battery negative terminal. B. Connect one lead of a self-powered test lamp or ohmmeter to one end of the part of the circuit you wish to test. If you are using an ohmmeter, hold the leads together and adjust the ohmmeter to read zero ohms.
Page 974
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Data Link Connector > Component Information > Diagrams > Diagram Information and Instructions > Page 1190...
B. Connect the short finder across the fuse terminals. C. Close all switches in series in the circuit that is being testing. D. Turn on the short circuit locator. It sends pulses of current to the short. This creates a pulsing magnetic field around the wiring between the fuse box and the short.
Page 976
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Data Link Connector > Component Information > Diagrams > Diagram Information and Instructions > Page 1191...
Page 977
Data Link Connector: Electrical Diagrams SD200-1 Data Link Details (1)
Page 978
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Data Link Connector > Component Information > Diagrams > Diagram Information and Instructions > Page 1192...
Page 980
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Data Link Connector > Component Information > Diagrams > Diagram Information and Instructions > Page 1193...
Page 982
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Data Link Connector > Component Information > Diagrams > Diagram Information and Instructions > Page 1194...
Page 984
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Data Link Connector > Component Information > Diagrams > Diagram Information and Instructions > Page 1195...
Page 986
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Data Link Connector > Component Information > Diagrams > Diagram Information and Instructions > Page 1196...
Page 987
Data Link Details (6) Connector Pin Outs...
Page 988
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Data Link Connector > Component Information > Diagrams > Diagram Information and Instructions > Page 1197...
Page 989
Data Link Details (7) Connector Pin Outs Diagrams: Other diagrams referred to by SD number (i.e. SD130-4, etc.) within these diagrams can be found at Diagrams by Number. See: Diagrams/Electrical Diagrams/Diagrams By Number Locations: Location photographs (references to PHOTOS) referred to within these diagrams can be found via the photo number at the vehicle level under Locations by Photo Number.
Page 990
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > EGR Valve Position Sensor > Component Information > Locations EGR Valve Position Sensor: Locations...
Page 991
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Electronic Throttle Actuator > Component Information > Locations Electronic Throttle Actuator: Locations...
Page 992
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > Recalls: > ENG094 > Jan > 11 > Campaign SA075 - ECM Update...
Page 993
This bulletin provides the procedure to upgrade the Powertrain Control Module (PCM) of some 2011 Model Year Sorento (XM) vehicles equipped with 3.5L engine prior to December 7, 2010. Some vehicles may experience a Malfunction Indicator Lamp (MIL) illuminated with system-related DTC P0017 stored in the PCM.
Page 994
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > Recalls: > ENG094 > Jan > 11 > Campaign SA075 - ECM Update For MIL ON/DTC P0017 >...
Page 995
1. Connect the power supply cable to the GDS tool or to the diagnostic terminal with the GDS docked. *NOTICE If attempting to perform ECM upgrade with power supply cable disconnected from the GDS tool, be sure to check that the GDS tool is fully charged before ECM upgrade. If the GDS tool is not fully charged, failure to perform the ECM upgrade may occur.
Page 996
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > Recalls: > ENG094 > Jan > 11 > Campaign SA075 - ECM Update...
Page 997
3. Connect the Main 16-pin DLC cable (GHDM - 241000) to the VCI.
Page 998
4. Connect the Main 16-pin DLC cable (GHDM - 241000) between the VCI and the OBD-II connector, located under the driver's side of the instrument panel. 5. With the ignition key ON, turn ON the VCI and GDS tool. Access the GDS vehicle identification number (VIN) screen and configure the vehicle using the VIN AUTO DETECT Function.
Page 999
Kia Sorento 4wd Workshop Manual (V6-3.5L (2011)) Kia Workshop Manuals > Powertrain Management > Computers and Control Systems > Engine Control Module > Component Information > Technical Service Bulletins > Recalls: > ENG094 > Jan > 11 > Campaign SA075 - ECM Update For MIL ON/DTC P0017 >...
Page 1000
*NOTICE VIN Inquiry data for this repair is provided for tracking purposes only. Kia retailers should reference SA075 when accessing the WebDCS system.