Relationship Between Aspect And Screen Aspect; When Projecting An Image From A Computer - Canon REALiS SX800 User Manual

Relationship between Aspect and Screen Aspect

This section describes the relationship between screen aspect (P62) and aspect (P65).
To project an image on the whole screen, select the most appropriate screen aspect ratio
and aspect according to the aspect ratio of the screen and input signal type.

When Projecting an Image from a Computer

When the input signal is [ANALOG PC-1], [ANALOG PC-2], or [DIGITAL PC (SX80 II)], select
screen aspect and aspect as follows according to the resolution of the image on the computer.
Screen Aspect
Screen
Ratio Setting
4:3 [4:3]
16:9 [16:9]
Resolution of Com-
puter Screen
SXGA+
4:3
VGA, SVGA, XGA
4:3
WXGA
SXGA
5:4
SXGA+
4:3
VGA, SVGA, XGA
4:3
WXGA
SXGA
5:4
147
Object of Projection
Project an image in a
largest possible size on
the screen.
Project an image in a
largest possible size on
the screen.
Project the computer
screen in the original
resolution.
Project an image in a
largest possible size on
the screen.
Project the computer
screen in the original
resolution.
(WUXGA not select-
able)
Project an image in a
largest possible size on
the screen.
Project the computer
screen in the original
resolution.
Project an image in a
largest possible size on
the screen.
Project an image in a
largest possible size on
the screen.
Project the computer
screen in the original
resolution.
Project an image in a
largest possible size on
the screen.
Project an image in a
largest possible size on
the screen.
Aspect Setting
[Auto]
(or [4:3])
[4:3]
[True size]
[Auto]
[True size]
[Auto]
[True size]
[Auto]
[Auto]
[True size]
[Auto]
[Auto]