Configuring Cache And Memory Settings - HP MR Gen10 Plus User Manual

Configuring cache and memory settings

Configuring cache and memory settings
Procedure Procedure
1. From the System Utilities screen, select System Configuration > HPE MRXXX Gen10+ > Main Menu > Controller Management.
2. In the Controller Management screen, select Advanced Controller Properties .
3. In the Advanced Controller Properties screen, click Cache and Memory to configure the cache and memory settings.
4. In the Cache and Memory screen, update the cache flush interval as needed.
The cache flush interval is the interval (in seconds) at which the contents of the onboard data cache are flushed.
The remaining settings on this screen are not configurable in this release.
Configuring cache and memory settings 133