Power Supply - Canon imageRUNNER ADVANCE C9075S PRO Safety Instructions

Power supply

#
• Do not damage or modify the power cord. Also, do not place heavy objects
on the power cord, or pull on or excessively bend it, as this could cause elec-
trical damage and result in a fire or electrical shock.
• Keep the power cord away from a heat source; failure to do this may cause
the power cord coating to melt, resulting in a fire or electrical shock.
• Do not connect or disconnect the power cord with wet hands, as this may
result in electrical shock.
•
Do not connect the power cord to a multiplug power strip, as this may cause
a fire or electrical shock.
• Do not bundle up or tie the power cord in a knot, as this may result in a fire
or electrical shock.
• Insert the power plug completely into the power outlet, as failure to do so
may result in a fire or electrical shock.
• Do not use power cords other than the power cord provided, as this may result
in a fire or electrical shock.
• As a general rule, do not use extension cords. Using an extension cord may
result in a fire or electrical shock.
#
•
Do not use power supplies with voltages other than those specified herein,
as this may result in a fire or electrical shock.
• Always grasp the power plug when disconnecting the power cord. Pulling on
the power cord may expose or snap the core wire, or otherwise damage the
power cord. If the power cord is damaged, this could cause current to leak,
resulting in a fire or electrical shock.
• Leave sufficient space around the power plug so that it can be unplugged
easily. If objects are placed around the power plug, you will be unable to
unplug it in an emergency.
• Make sure to contact your local authorized dealer when repairing or replacing
the power cord. Do not attempt to repair or replace the cord yourself.
WARNING
CAUTION
Chapter 4 - Important safety instructions
Power supply
17