Note:
- Indicated voltage values are the standard values for the unit measured
by the DC electronic circuit tester (high-impedance) with the chassis
taken as standard.
Therefore, there may exist some errors in the voltage values, depending
on the internal impedance of the DC circuit tester.
- Circuit voltage and waveform described herein shall be regarded as
reference information when probing defect point because it may differ
from actual measuring value due to difference of Measuring instrument
and its measuring condition and product itself.
14.1. Voltage Measurement
14.1.1. CD Servo P.C.B.
14.1.2. Main/Power P.C.B.
14.1.3. Panel P.C.B.
14.1.4. Transformer P.C.B.
14.1.5. Deck P.C.B.
14.1.6. Deck Mechanism P.C.B.
14.2. Waveform
15. Wiring Connection Diagram
16. Block Diagram
17. Notes of Schematic Diagram
(All schematic diagrams may be modified at any time with the development of new technology)
Note :
S900
Stop/-Demo switch
S901
CD switch
S902
Tape switch
S903
Tuner/Band switch
S904
64