Table of Contents
Advertisement
Machine Translated by Google
Precautions for use
To avoid damaging the surface of the display
To
Insecticide and hairspray on the display surface
Chemicals such as insect repellent, rubber, and vinyl
Avoid contact with Neil products for long periods of time.
The surface of the main body may be altered or deformed,
or the paint may peel off.
About fuses
When replacing a fuse, be sure to use a fuse with the
specified capacity (amperage) indicated on the fuse case.
Substituting a fuse or wire with a capacity larger than the
specified capacity not only causes a malfunction but is also
extremely dangerous.
fuse
About liquid crystal display
The display may be difficult to see at extremely high or low
temperatures, but this is not a malfunction. When the
ambient temperature returns to normal temperature, the
display returns to normal.
6
Handling of MD
The MD itself is stored in a cartridge,
Easy to handle without worrying about dust and fingerprints
It has become. However, it's a cartridge
Dirt or warp may cause malfunction.
There is also. Enjoy with beautiful sounds forever
Please note the following:
Do not touch the inside of MD directly
Do not open the shutter by
hand. unreasonableness
It breaks when you open it
vinegar.
If the shutter opens when
you remove it from the
machine, close it immediately.
please.
About the place to put
Where it is exposed to direct sunlight
Where the temperature is high, such as
In places with high humidity
Please do not place.
Especially in summer, in direct sunlight
Of the car with the windows closed
Sheet, dash bow
The temperature on the top of the door becomes quite high, so
Please do not leave it.
Advertisement
Table of Contents
