Operation - Toshiba RAV-SM182CTP-UL Owner's Manual

▼ Icon list
Shows the Energy saving operation is
activated.
Shows the remote control sensor is
activated.
(*2)
Shows the Night operation is activated.
Shows the central control device prohibits
the use of the remote control.
Shows the saving operation is activated.
*2 Normally the temperature sensor of the indoor unit senses the temperature. The temperature around the remote
control can also be sensed. For details, contact the dealer where you purchased the air conditioner. * Do not use
the function when the air conditioner is controlled in a group.
▼ Ventilation icon list
Ventilation icons appear on the display only when a ventilation unit is connected.
Automatic mode
Bypass mode
Total heat exchange mode
15-EN
01_OM_1115653833_EN.indd 8 01_OM_1115653833_EN.indd 8
Shows a timer function is activated.
Shows the Louver lock is activated.
Shows the setting of the louver.
!
Shows the fi lter needs to be cleaned.
Shows soft cooling is activated.
Shows operation switching control is in
progress.
24-hour ventilation mode
Nighttime heat purge mode
4

Operation

■
Running operation
* Some operation modes are not available depending on the type of indoor unit.
12:00
75
F
Cool
Mode Fan Speed
■
Changing the fan speed
* The available fan speeds vary depending on the indoor unit connected.
– 8 –
1
Push the [ ON/OFF] button to start running.
2
Push the " Mode" [ F1 ] button to
Mode
select the operation mode.
The operation mode changes as follows each time
the button is pushed.
Auto Heat Dry Cool Fan
3
Push the [ ON/OFF] button to stop running.
1
Push the " Fan speed" [ F2 ] button
Fan speed
to select the fan speed.
The fan speed changes as follows each time the
button is pushed.
Auto High Med Low
When the remote control is used in combination with
an indoor unit that supports 5 speeds, each
push of the " Fan speed" [ F2 ] button
Fan speed
changes the fan speed display.
Med +
Auto High
Low +
Low Med
" " appears on the display when the connected
indoor unit is not equipped with the fan speed.
" " is not available when "Fan" is selected as
the operation mode.
4/4/2565 BE 11:10 4/4/2565 BE 11:10
EN
16-EN