Product Maintenance; Troubleshooting - Fellowes AutoMax 200C Instructions Manual

ADVANCED PRODUCT FEATURES
SilentShred™ Technology
SilentShred™ shreds without
noisy disruptions.
SLEEP MODE OPERATION
Feature shuts down the shredder after 2 minutes
of inactivity
WHEN IN SLEEP MODE
1
2
or
open lid and load paper
For more information about all of Fellowes Advanced Product Features go to www.fellowes.com

PRODUCT MAINTENANCE

OILING SHREDDER
we recommend you oil your shredder each time you empty your waste bin.
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
1 2
Open lid *Carefully apply oil
across cutters (do not
get oil in paper tray)
* Only use a non-aerosol vegetable oil in long
nozzle container such as Fellowes 35250

TROUBLESHOOTING

will remain illuminated and the shredder will not operate for the duration of the recovery time.
4
Insert paper
3
Close lid. Press and
hold forward ( )
2-3 seconds
); open lid and remove paper.
Energy Saving Sleep Mode
Feature shuts down the shredder
after 2 minutes of inactivity
CLEANING AUTO-START INFRARED SENSORS
may become blocked by paper dust causing the motor to run even if there is no paper present.
(Note: the paper detection sensors is located in the center of the paper entry).
TO CLEAN THE SENSORS
1
2
Open lid
shredder
Auto Reverse
Stops and reverses paper if
3
4
Locate Auto-start Dip cotton swab in
infrared sensor rubbing alcohol
5
wipe away any
contamination from
the paper sensors