Canon EOS Rebel T3 18-55mm IS II Kit Instruction Manual page 57

(3)Drive mode/Flash firing
Drive mode: Press the <U> key or turn the <6> dial to set it as desired.
<u> Single shooting : Shoot one image at a time.
<i> Continuous shooting:
<j> Self-timer:10 sec : The picture is taken 10 seconds after you
<q> Self-timer:Continuous:
Flash firing: Press the <U> key or turn the <6> dial to set it as
desired.
<a> Auto flash: The flash fires automatically when necessary.
<I> Flash on : The flash fires at all times.
<b> Flash off : The flash is disabled.
If the image-recording quality is 1 or 1+73, the continuous
shooting speed will be max. approx. 2 fps and approx. 0.8 fps (averaged
value) respectively.
When using <j> or <q>, see the
When using <b>, see "Disabling Flash" on page 54.
When you press <0>, the drive mode
or flash firing setting screens will appear.
Set as desired, then press <0> to
finalize the setting and return to the
Quick Control screen.
While you hold down the shutter button
completely, shots will be taken continuously.
You can shoot up to about 3 shots per sec.
press the shutter button.
Press the <V> key to set the number of
multiple shots (2 to 10) to be taken with the
self-timer. 10 seconds after you press the
shutter button, the set number of multiple
shots will be taken.
notes on page 87.
C Creative Auto Shooting
57