Step 1 : If the cassette tape is not ejected due to twinng around capstan or pinch roller during
playing or recording, rotate a flywheel F to the arrow direction to remove twined tape.
Step 2 : Push the lever to the arrow direction, open the cassette cover and take out the cassette
tape.
10. Service Positions
10.1. Checking procedure
Note : For the disassembling procedure, see the section 9.
10.2. Checking the major P.C.B.
1. Disassembly of Side Panel L & R
2. Disassembly of Top Cabinet
3. Disassembly of Deck Mechanism
4. Disassembly of Front Panel
5. Disassembly of Panel P.C.B., Headphone P.C.B. and Switch P.C.B.
6. Disassembly of Tact Switch P.C.B.
7. Disassembly of Rear Panel P.C.B.
8. Disassembly of Main P.C.B.
9. Disassembly of Transformer P.C.B.
10. Disassembly of Speaker Terminal P.C.B.
11. Disassembly of Power P.C.B.
12. Disassembly of CR16 Mechanism
71