Panasonic PV-C1324-K Manual page 33

(For model with 13 inch CRT)
Specification :
Refer to descriptions below.
INPUT :
Video Input Jack,
Monoscope Pattern Signal
Mode :
STOP
Equipment :
NTSC Video Pattern Generator
(For model with 13 inch CRT)
1. Supply a Monoscope Pattern Signal to the Video Input Jack.
2. Select H-CENTER in EVR adjustment mode and adjust so that
width A is approximately equal to width B.
Note:
Width A is wider than width B slightly.
3. Select V SIZE in EVR adjustment mode and adjust so that the 11rd
line is just in view.
4. If the line are not positioned correctly, select V POSITION in
adjustment mode and adjust correctly.
Fig. E6-1
33