Table of Contents
Advertisement
seconds in power on condition.The unit goes into Service Mode.
To release from this mode, disconnect AC Plug.
5.1.6. MECHA MANUAL MODE
In shut off condition or in Service Mode, press the CH UP on the unit and CH UP buttons on the
remote together without a cassette.
In this mode, Loading or Unloading operation can be confirmed by pressing the REW/SLOW or
FF/SLOW button on the remote.
5.1.7. TRACKING CENTER MODE (TRACKING FIX AT CENTER)
Insert the Cassette tape. Set the unit into Service Mode.
Press CH UP on the unit and CH DOWN buttons on the remote together in play back mode.
In this mode, the tracking is fixed at center. (Auto tracking and manual tracking functions are
not operational.)
5.1.8. DEFEATING THE AUTO TRACKING
To defeat the Auto Tracking Function, place the instrument in the STOP mode and place a
jumper between TP6003 and TP6009 on the TV/VCR Main C.B.A. The tracking will be placed in
the neutral position.
5.1.9. CAUTION FOR INSTALLATION OF VCR UNIT
CAUTION:
Opener Lever may be damaged when VCR Unit is installed, with
Cassette Door-Lid and Opener Lever of Cassette Up Ass'y set
incorrectly.
Install the VCR Unit as follows:
1. Swing the Cassette Door-Lid all the way open until the Cassette
Door tab clears the Opener Lever.
Fig. 4-1
Fig. 4-2
Fig. 5
15
Advertisement
Table of Contents
