Removal and Replacement Procedures— Slim Tower (ST) Chassis
7.13 Front I/O Devices
1. Prepare the computer for disassembly
2. Remove the computer cover
3. Remove the two screws that secure the front I/O device to the chassis 1.
4. Rotate the drive cage to its full upright position.
5. Disconnect the front I/O cable from the system board.
6. Push the front I/O device into the chassis 2 and snake the cable through the tunnel 3 to
remove the device from the chassis.
To reinstall the front I/O device, reverse the removal procedure.
7–34
(Section
7.1).
(Section
7.5).
43361 1-001
Service Reference Guide, dx7300